Design RC00076
Oval Gold Filigree Cat's Eye Stainless Steel Cocktail Ring for Women
Oval Gold Filigree Cat's Eye Stainless Steel Cocktail Ring for Women is a cocktail ring in 316L stainless steel with vacuum PVD plating. MOQ 100 pcs per design per colour; samples from US$100.
A vintage-style women's cocktail ring with a large oval cat's eye cabochon held in a scalloped filigree crown, on a pierced scroll basket that runs into the shoulders. Shown with pink and white stones.
Free proposal and quote · reply within 24 hours
- Ring type
- Cocktail ring
- Style
- Vintage, Classic
- Top size
- 18 × 23 mm AI estimate
Pick a colour to start
The sample is one option. Change colour, material, plating, stones or branding to fit your budget.
- MOQ 100 pcs per design per colour; mix sizes, not colours
- Existing mould: made as sampled. Changes that need a new mould are sampled as a new design (from US$100, mould included; the cost is credited to your bulk order)
- Samples ship 15–20 days after approval, with a 3D print and stone-setting preview
- Bulk about 35–45 days from sample approval and deposit
- Bulk payment: 30% deposit, 70% balance before shipment; any sample cost you paid comes off the balance
- 4 common changes need no new mould
Your quote comes with a PDF spec sheet.
About this design
A large oval cat's eye cabochon of about 20 mm, with a soft silky glow, is the focus of this ring.
It sits in a crown whose edge is scalloped like lace, above a pierced basket of scrolls and curls that continues down both shoulders, a classic vintage cocktail-ring construction.
The open filigree lets light under the stone and keeps a big ring lighter on the hand, while the plain gold band keeps it easy to wear.
Pink and white versions were photographed. Any oval cabochon of the same size, such as a turquoise-look or onyx-look stone, fits the same mould.
Updated
Buyer notes
- Trend
- Vintage-style cocktail rings with large cabochons are back in evening and vintage-inspired ranges.
- Positioning
- A hero piece; the filigree casting drives the cost, while cabochon swaps keep the range flexible.
- Building a range
- Rotate cabochon colours on one mould, such as pink, white, turquoise-look and onyx-look, for a vintage edit.
Customize this design
Pick what to change. Your brief shows whether new tooling is needed, where the cost goes and how to save. We quote from it.
Custom orders we have made
- The request
- The buyer chose three designs from our samples, but her customers do not buy open rings. She also wanted a three-ring stacking set split across sizes.
- What we did
- Because the designs already had moulds, we modified them to closed bands instead of making new moulds. One design she sent had a brushed finish we could not match, so we told her before ordering rather than after.
- Result
- The three-ring set was ordered in four sizes (US 8 to 11), with the closed versions of the three designs planned for the next order.
- The request
- The brand needed 8 mm stainless steel outer shells for its smart ring, with a new surface pattern, gold plating with a green colour fill, and its lettering on the shell.
- What we did
- We made a sample first. After review, the green fill was adjusted brighter to the brand's colour reference, the lettering was laser-marked, and an extra ring size was sampled from the same model when the brand needed it.
- Result
- Bulk planned in black and gold across five sizes, followed by samples of three further shell designs for a larger order.
Specifications
Specs describe the photographed sample; all can change for your order. Tags show the source: factory-confirmed, measured, or AI estimate from photos (checked before we quote).
Ring
- Design code
- RC00076
- Ring type
- Cocktail ring
- Silhouette
- Large oval head
- Band
- Pierced filigree shoulders tapering to a plain band
- Top
- Oval cabochon in a scalloped filigree crown
Decoration
- Stone
- Oval cat's eye cabochon ×1 AI estimate
- Stone colours
- Pink / white
- How stones are fixed
- Glued into a cast crown
- Pattern
- Filigree scrolls
- Surface finish
- High polish with pierced filigree
Sample specs
- Material
- Confirmed with quote
- Plating
- Confirmed with quote
- Weight
- Confirmed with quote
- Dimensions
- Top about 18 × 23 mm, ring height about 31 mm (est.) AI estimate
Style & use
- Style
- Vintage, Classic
- Theme
- Filigree scrolls
- Categories
- Cocktail ring, Statement, Cabochon, Vintage
- Who it suits
- Women
- Fits these lines
- Vintage-inspired line, Evening and party edit, Statement cocktail ring line
Structure & craft
Parts, sizes and how the ring is made, for designers and developers. “Est.” sizes are estimated from proportions.
Four parts: a large oval cat's eye cabochon glued into a crown with a scalloped, pierced edge; a pierced filigree basket of scrolls under the crown that continues down both shoulders; and a plain band. The metal is cast in one piece, polished and plated, then the stone is glued in.
- 4 parts
- 1 stone
- One-piece lost-wax casting in stainless steel
- Left–right mirror
- Closed band
Ring anatomy
Cat's eye cabochonStone
Large oval, smooth high dome; Polished, with a silky cat's eye sheen. Glass cat's eye; other cabochons of the same size fit.
Full details
- Where
- Top centre
- Shape
- Large oval, smooth high dome
- Surface
- Polished, with a silky cat's eye sheen
- Colour
- Pink / white
Scalloped filigree crownFrame / bezel
Oval crown with a scalloped, pierced lace-like edge; High polish.
Full details
- Where
- Around the stone
- Shape
- Oval crown with a scalloped, pierced lace-like edge
- Surface
- High polish
- Colour
- Gold
Filigree scroll basketOpenwork
Pierced scrolls and curls forming an open basket; Polished, pierced. Mirror images on the left and right.
Full details
- Where
- Under the crown and down both shoulders
- Shape
- Pierced scrolls and curls forming an open basket
- Surface
- Polished, pierced
- Colour
- Gold
Plain bandBand
Plain band tapering from the shoulders; High polish.
Full details
- Where
- Lower band
- Shape
- Plain band tapering from the shoulders
- Profile
- Half-round
- Surface
- High polish
- Colour
- Gold
Key dimensions
- Silhouette
- Large oval cocktail ring on a filigree basket
- Symmetry
- Left–right mirror
- Head W × L × H
- 18 mm Est. × 23 mm Est. × 12 mm Est.
- Main stone size
- 15 mm Est. × 20 mm Est.
- Band width (top / bottom)
- 14 mm Est. / 4 mm Est.
- Ring height
- 31 mm Est.
- Inner diameter
- 17.5 mm Est. Sample estimated at US 7; sizes made to order
- Open ring
- No, closed band
How the parts fit together
- Cat's eye cabochonfixed intoScalloped filigree crown
The cat's eye cabochon is fixed into the scalloped filigree crown
Fixed by: Stone gluing into cast crown - Filigree scroll basketfixed toScalloped filigree crown
The filigree scroll basket is fixed to the scalloped filigree crown
- Filigree scroll basketjoined toPlain band
The filigree scroll basket joins the plain band
Other ways to fix the stones
Each method changes security, sparkle and cost. Moving off glue setting usually needs a new mould.
- Glue settingThis design
The stone is glued into a cast seat. Lowest cost and fastest; the usual method for fashion steel jewellery.
- Bezel settingTo confirm · usually new mould
A metal rim wraps the whole stone. Very secure and hard to lose, but covers part of the stone.
- Prong settingTo confirm · usually new mould
Metal claws hold the stone, letting in more light for extra sparkle; suits large faceted stones.
- Pavé / micro settingTo confirm · usually new mould
Many small stones are held by tiny metal beads to form a sparkling surface.
- Channel settingTo confirm · usually new mould
Stones sit in a row between two metal rails; smooth and snag-free.
Manufacturing
- Fine filigree must cast fully without gaps
- Polishing and plating must reach inside the openings
- Large cabochon needs a clean, even glue line
How this ring is made
9 steps from mould to shipping. Your brief above shows which steps your changes affect.
Shaping the ring
- Wax model
Wax is injected into a rubber mould to make an exact copy of the ring. Each design and size has its own mould.
On this ring: One rubber mould per ring size
- Casting
The wax copy is set in plaster and melted out; molten steel fills the hollow. This is lost-wax casting.
On this ring: Crown, filigree basket and band cast as one piece
- Trimming
The casting stub is cut off and ground smooth.
Surface & colour
- Polishing
The ring is ground and polished to its final shine.
On this ring: Polished inside the filigree openings as well as outside
- Plating
A coloured coating (gold, rose gold, black…) is applied to the steel. Colour and coating thickness are set here; thicker coatings last longer.
On this ring: Gold-tone plating
Details & stones
- Stone setting
Stones, zirconia or pearls are glued into cast seats. Seat size is set by the mould, so same-size colour swaps are easy.
On this ring: One large oval cabochon glued into the crown
Check, pack & ship
- Quality check
Each piece is checked against the approved sample for finish, colour, size, weight and stone security. Rejects are reworked.
On this ring: Check the filigree for casting gaps and the stone for an even glue line
- Packing
We pack free with your packaging: bags, boxes, labels, sorted by size.
- Shipping
Cartons are marked, listed and sent by courier, air or sea, with tracking.
Ways to derive similar designs
| What changes | Tooling | Examples |
|---|---|---|
| Cabochon colour or type (same size) | Same mould | Turquoise-look, onyx-look, opal-look |
| Plating colour | Same mould | Gold, silver tone, rose gold |
| Stone size or shape | New mould | Round cabochon, smaller oval, faceted stone |
What the photos show
Other ways to make this design
The sample is one way to make this design. Any oval cabochon of the same size fits the same mould, and the plating can follow your collection.
4 changes on the existing mould
- 1Turquoise-look, onyx-look or opal-look cabochons
Same mould, very different moods
- 2Silver tone instead of gold
Antique-silver look with dark stones
- 3304 steel and thinner plating
Lower unit cost
- 4Logo inside the band
Brand identity without changing the design
Before you order
What buyers ask most, and what most often goes wrong later.
Why stones come loose, and how to avoid it
Our stones are glued into cast seats. They come loose when a stone doesn’t fit its seat, or from knocks in transit. Confirm stone type (glass / cubic zirconia) and size when ordering, and ask for a piece-by-piece stone check if you need one.
Will the plating fade? How long does it last?
We use vacuum (PVD) plating, which wears better than standard electroplating. Colour life depends on coating thickness, wear and chemicals. Specify thickness to match your after-sales needs. If engraved or etched text must resist solvents, tell us first.
304 or 316L steel?
316L resists corrosion better and suits long skin contact and sensitive skin; 304 costs less and suits fast-fashion lines. For EU/US markets, 316L is recommended.
Size accuracy and size split
Each size has its own mould, made to US sizing. Give quantity per size and any tolerance (e.g. 7:2, 8:4, 9:4, 10:2). Women’s rings usually run US 6–10, men’s 8–13; other sizes need mould work.
The approved sample is the standard
Bulk matches the approved sample in style, colour, stones and weight. Photos can differ in colour, so confirm key colours on the sample. Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview; bulk starts after sample approval and deposit.
Which logo method?
Laser marking and etching need no mould change; raised text does. Etching happens before plating. Send your logo file, position and size. From US$300.
Is the motif sellable in your market?
Some motifs (e.g. snakes, religious symbols) are restricted in some countries or platforms. Tell us where you sell and we’ll flag risks first.
How custom orders work
- 1Send your brief
Use the planner above to list changes and order details.
- 2Review & quote
We confirm feasibility, tooling and unit price. MOQ 100 pcs per design per colour, mixed sizes.
- 3Tooling & sample
Same-mould changes go straight to sampling. New designs start with CAD and tooling (from US$100, mould included; the cost is credited to your bulk order). Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview.
- 4Production
Bulk takes about 35–45 days from sample approval and deposit: wax → casting → sprue grinding → polishing → plating → enamel / stone gluing → packing.
- 5QC & shipping
Inspected against the approved sample, packed and shipped.
Frequently asked questions
What is the MOQ for this ring?
MOQ is 100 pcs per design per colour, mixed sizes. New design samples from US$100, mould included; the cost is credited to your bulk order.
Can I order this design with my logo?
Yes. Laser or etched logo on orders from US$300. Send us your packaging and we pack it free, or we can recommend a supplier.
Can I use other stones?
Yes. Any oval cabochon of the same size fits the existing mould, such as turquoise-look or onyx-look. A faceted stone needs the seat reshaped.
Is such a big ring heavy?
The pierced filigree basket keeps it lighter than a solid ring of the same size, and the inside of the band is rounded and hand-polished.
What is the sample made of?
The photos show gold-tone samples with pink and white stones. Material grade, plating and weight are confirmed with your quote and can be chosen for your budget.
Can it be made cheaper?
Choose 304 steel, keep the cat's eye glass cabochon and order fewer colours with more pieces per colour.