Design E00508
Gold Double Oval Cat's Eye Cabochon Stainless Steel Bypass Ring for Women
Gold Double Oval Cat's Eye Cabochon Stainless Steel Bypass Ring for Women is a bypass ring in 316L stainless steel with 24K PVD gold plating. MOQ 100 pcs per design per colour; samples from US$100.
A women's gold bypass ring with two oval cat's eye cabochons in smooth polished bezels, one at each end of the band, shown in pink, cream and green.
Free proposal and quote · reply within 24 hours
- Ring type
- Bypass ring
- Style
- Modern, Classic
- Sample material
- 316L stainless steel Factory-confirmed
- Sample plating
- 24K PVD gold AI estimate
- Sample weight
- 6.5 g AI estimate
- Top size
- 13 × 23 mm AI estimate
Pick a colour to start
The sample is one option. Change colour, material, plating, stones or branding to fit your budget.
- MOQ 100 pcs per design per colour; mix sizes, not colours
- Existing mould: made as sampled. Changes that need a new mould are sampled as a new design (from US$100, mould included; the cost is credited to your bulk order)
- Samples ship 15–20 days after approval, with a 3D print and stone-setting preview
- Bulk about 35–45 days from sample approval and deposit
- Bulk payment: 30% deposit, 70% balance before shipment; any sample cost you paid comes off the balance
- 6 common changes need no new mould
Your quote comes with a PDF spec sheet.
About this design
Two oval cat's eye cabochons sit diagonally on top of the finger, spanning about 23 mm, each in its own smooth gold bezel.
The soft silky sheen of cat's eye glass gives a gentle colour glow that works well in pastel and earthy shades.
A slim band wraps around and the two ends pass each other, so the stones sit side by side in a classic toi-et-moi layout.
Three colourways were photographed: pink, cream and green; any oval cabochon of the same size fits the same mould.
Updated
Buyer notes
- Trend
- Toi-et-moi rings with two coloured stones are a strong trend, and soft cat's eye colours appeal to everyday buyers.
- Positioning
- A core piece: simple construction and glass cabochons keep the cost low while offering many colourways.
- Building a range
- Run a colour wall of five or six pairs on one mould, including mixed-colour pairs.
Customize this design
Pick what to change. Your brief shows whether new tooling is needed, where the cost goes and how to save. We quote from it.
Custom orders we have made
- The request
- The buyer chose three designs from our samples, but her customers do not buy open rings. She also wanted a three-ring stacking set split across sizes.
- What we did
- Because the designs already had moulds, we modified them to closed bands instead of making new moulds. One design she sent had a brushed finish we could not match, so we told her before ordering rather than after.
- Result
- The three-ring set was ordered in four sizes (US 8 to 11), with the closed versions of the three designs planned for the next order.
- The request
- The brand needed 8 mm stainless steel outer shells for its smart ring, with a new surface pattern, gold plating with a green colour fill, and its lettering on the shell.
- What we did
- We made a sample first. After review, the green fill was adjusted brighter to the brand's colour reference, the lettering was laser-marked, and an extra ring size was sampled from the same model when the brand needed it.
- Result
- Bulk planned in black and gold across five sizes, followed by samples of three further shell designs for a larger order.
Specifications
Specs describe the photographed sample; all can change for your order. Tags show the source: factory-confirmed, measured, or AI estimate from photos (checked before we quote).
Ring
- Design code
- E00508
- Ring type
- Bypass ring
- Silhouette
- Double cabochon bypass
- Band
- Slim round band with passing ends
- Top
- Two oval cat's eye cabochons in bezels
- Adjustable
- Yes
Decoration
- Stone
- Oval cat's eye cabochon ×2 AI estimate
- Stone colours
- Pink / cream / green
- How stones are fixed
- Glued into a cast bezel
- Pattern
- Cabochon pair
- Surface finish
- High polish
Sample specs
- Material
- 316L stainless steel Factory-confirmed
- Plating
- 24K PVD gold AI estimate
- Weight
- 6.5 g AI estimate
- Dimensions
- stones span 23 mm, ring height 25 mm AI estimate
Style & use
- Style
- Modern, Classic
- Theme
- Cabochon pair
- Categories
- Open ring, Cabochon, Modern sculptural
- Who it suits
- Women
- Fits these lines
- Soft colour stone edit, Toi-et-moi ring line, Everyday colour line
Structure & craft
Parts, sizes and how the ring is made, for designers and developers. “Est.” sizes are estimated from proportions.
Four parts: two oval cat's eye cabochons, a smooth bezel cup for each at the two ends of the band, and a slim band whose ends pass each other on top. The metal is cast in one piece, polished and plated, then the cabochons are glued in.
- 4 parts
- 2 stones
- One-piece lost-wax casting in stainless steel, open ends shaped after casting
- Asymmetric
- Open, adjustable
Ring anatomy
Upper cat's eye cabochonStone
Oval high dome; Silky sheen.
Full details
- Where
- Top, upper end
- Shape
- Oval high dome
- Surface
- Silky sheen
- Colour
- Pink / cream / green
Lower cat's eye cabochonStone
Oval high dome; Silky sheen.
Full details
- Where
- Top, lower end
- Shape
- Oval high dome
- Surface
- Silky sheen
- Colour
- Pink / cream / green
Smooth bezelsFrame / bezel×2
Oval cups with a smooth rim; High polish.
Full details
- Where
- Around each stone
- Shape
- Oval cups with a smooth rim
- Profile
- Rounded
- Surface
- High polish
- Colour
- Gold
Bypass bandBand
Slim band with ends passing on top; High polish.
Full details
- Where
- Around the finger
- Shape
- Slim band with ends passing on top
- Profile
- Round
- Surface
- High polish
- Colour
- Gold
Key dimensions
- Silhouette
- Double cabochon bypass
- Symmetry
- Asymmetric
- Head W × L × H
- 13 mm Est. × 23 mm × 5.5 mm Est.
- Main stone size
- 9 mm Est. × 11 mm Est.
- Band width (top / bottom)
- 13 mm Est. / 2.5 mm Est.
- Ring height
- 25 mm
- Inner diameter
- 17.5 mm Est. Sample estimated at US 7; sizes made to order
- Open ring
- Yes, adjustable
How the parts fit together
- Upper cat's eye cabochonfixed intoSmooth bezels
The upper cat's eye cabochon is fixed into the smooth bezels
Fixed by: Stone gluing into cast seats - Lower cat's eye cabochonfixed intoSmooth bezels
The lower cat's eye cabochon is fixed into the smooth bezels
Fixed by: Stone gluing into cast seats - Smooth bezelsfixed toBypass band
The smooth bezels are fixed to the bypass band
Other ways to fix the stones
Each method changes security, sparkle and cost. Moving off glue setting usually needs a new mould.
- Glue settingThis design
The stone is glued into a cast seat. Lowest cost and fastest; the usual method for fashion steel jewellery.
- Bezel settingTo confirm · usually new mould
A metal rim wraps the whole stone. Very secure and hard to lose, but covers part of the stone.
- Prong settingTo confirm · usually new mould
Metal claws hold the stone, letting in more light for extra sparkle; suits large faceted stones.
- Pavé / micro settingTo confirm · usually new mould
Many small stones are held by tiny metal beads to form a sparkling surface.
- Channel settingTo confirm · usually new mould
Stones sit in a row between two metal rails; smooth and snag-free.
Manufacturing
- Both cabochons must sit level and match in colour
- Glue must not show at the bezel rim
How this ring is made
9 steps from mould to shipping. Your brief above shows which steps your changes affect.
Shaping the ring
- Wax model
Wax is injected into a rubber mould to make an exact copy of the ring. Each design and size has its own mould.
On this ring: One rubber mould per ring size
- Casting
The wax copy is set in plaster and melted out; molten steel fills the hollow. This is lost-wax casting.
On this ring: Bezels and band cast as one piece
- Trimming
The casting stub is cut off and ground smooth.
Surface & colour
- Polishing
The ring is ground and polished to its final shine.
On this ring: Bezels polished to a mirror
- Plating
A coloured coating (gold, rose gold, black…) is applied to the steel. Colour and coating thickness are set here; thicker coatings last longer.
On this ring: Gold-tone PVD plating
Details & stones
- Stone setting
Stones, zirconia or pearls are glued into cast seats. Seat size is set by the mould, so same-size colour swaps are easy.
On this ring: Two cat's eye cabochons glued into the bezels
Check, pack & ship
- Quality check
Each piece is checked against the approved sample for finish, colour, size, weight and stone security. Rejects are reworked.
On this ring: Check the stones match and sit level
- Packing
We pack free with your packaging: bags, boxes, labels, sorted by size.
- Shipping
Cartons are marked, listed and sent by courier, air or sea, with tracking.
Ways to derive similar designs
| What changes | Tooling | Examples |
|---|---|---|
| Cabochon colour (same size) | Same mould | Blue, grey, lavender |
| Stone layout | New mould | Three stones |
| Metal colour | Same mould | Gold, steel (silver tone) |
What the photos show
Other ways to make this design
The sample is 316L steel with 24K PVD gold and cat's eye cabochons in pink, cream or green. Any oval cabochon of the same size, mixed colours and steel colour use the same mould.
6 changes on the existing mould
- 1Two different colours on one ring
A playful mix-and-match line
- 2Blue, grey or lavender cat's eye
More colours on one mould
- 3Steel (silver tone)
Cooler colourways
- 4304 steel and 18K PVD
Lower unit cost
Before you order
What buyers ask most, and what most often goes wrong later.
Why stones come loose, and how to avoid it
Our stones are glued into cast seats. They come loose when a stone doesn’t fit its seat, or from knocks in transit. Confirm stone type (glass / cubic zirconia) and size when ordering, and ask for a piece-by-piece stone check if you need one.
Will the plating fade? How long does it last?
We use vacuum (PVD) plating, which wears better than standard electroplating. Colour life depends on coating thickness, wear and chemicals. Specify thickness to match your after-sales needs. If engraved or etched text must resist solvents, tell us first.
304 or 316L steel?
316L resists corrosion better and suits long skin contact and sensitive skin; 304 costs less and suits fast-fashion lines. For EU/US markets, 316L is recommended.
Size accuracy and size split
Each size has its own mould, made to US sizing. Give quantity per size and any tolerance (e.g. 7:2, 8:4, 9:4, 10:2). Women’s rings usually run US 6–10, men’s 8–13; other sizes need mould work.
The approved sample is the standard
Bulk matches the approved sample in style, colour, stones and weight. Photos can differ in colour, so confirm key colours on the sample. Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview; bulk starts after sample approval and deposit.
Which logo method?
Laser marking and etching need no mould change; raised text does. Etching happens before plating. Send your logo file, position and size. From US$300.
Is the motif sellable in your market?
Some motifs (e.g. snakes, religious symbols) are restricted in some countries or platforms. Tell us where you sell and we’ll flag risks first.
How custom orders work
- 1Send your brief
Use the planner above to list changes and order details.
- 2Review & quote
We confirm feasibility, tooling and unit price. MOQ 100 pcs per design per colour, mixed sizes.
- 3Tooling & sample
Same-mould changes go straight to sampling. New designs start with CAD and tooling (from US$100, mould included; the cost is credited to your bulk order). Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview.
- 4Production
Bulk takes about 35–45 days from sample approval and deposit: wax → casting → sprue grinding → polishing → plating → enamel / stone gluing → packing.
- 5QC & shipping
Inspected against the approved sample, packed and shipped.
Frequently asked questions
What is the MOQ for this ring?
MOQ is 100 pcs per design per colour, mixed sizes. New design samples from US$100, mould included; the cost is credited to your bulk order.
Can I order this design with my logo?
Yes. Laser or etched logo on orders from US$300. Send us your packaging and we pack it free, or we can recommend a supplier.
Can each ring have two different colours?
Yes. Mixing colours only changes the stone pairing and uses the same mould.
What is cat's eye?
Here it means a glass cabochon with a silky sheen; natural stones can be quoted if needed.
Is it adjustable?
The ends pass each other, so it can be eased slightly; we recommend ordering by size.
What is the sample made of?
The sample is 316L stainless steel with 24K PVD gold plating, about 6.5 g. Material, plating and colour can be re-specified for your budget.
Can it be made at a lower cost?
Choose 304 steel, keep glass stones, and order fewer colours with more pieces per colour. Laser logos add brand identity without mould costs.