Colour: Gold
Design N002835
Gold-Tone Butterfly White Enamel Metal Cocktail Ring for Women
Gold-Tone Butterfly White Enamel Metal Cocktail Ring for Women is a cocktail ring in 316L stainless steel with vacuum PVD plating. MOQ 100 pcs per design per colour; samples from US$100.
A gold-tone butterfly cocktail ring with a polished rounded shank, four detailed wings and glossy white enamel or resin-glaze fills in recessed panels. The butterfly top is a cast relief design rather than openwork, with a raised central body and decorative wing lines.
Free proposal and quote · reply within 24 hours
- Ring type
- Cocktail ring
- Style
- Vintage-inspired, Classic, Ornate
- Top size
- 23 × 24 mm AI estimate
Pick a colour to start
The sample is one option. Change colour, material, plating, stones or branding to fit your budget.
- MOQ 100 pcs per design per colour; mix sizes, not colours
- Existing mould: made as sampled. Changes that need a new mould are sampled as a new design (from US$100, mould included; the cost is credited to your bulk order)
- Samples ship 15–20 days after approval, with a 3D print and stone-setting preview
- Bulk about 35–45 days from sample approval and deposit
- Bulk payment: 30% deposit, 70% balance before shipment; any sample cost you paid comes off the balance
- 4 common changes need no new mould
Your quote comes with a PDF spec sheet.
About this design
This design centres on a gold-tone four-wing butterfly head above a polished rounded shank. The large raised motif gives the ring a clear focal point for a butterfly or nature-themed range.
The cast butterfly uses polished gold-tone borders, raised vein-like lines and small ornamental relief marks. White enamel or resin glaze sits in recessed wing panels; the construction is relief with filled recesses, not pierced openwork.
The photographed variant combines gold tone with glossy white fill and has no visible stone setting. Brands can request a different enamel colour, a multi-colour wing palette or a plain gold-tone relief treatment.
It works as a hero piece in an enamel statement cocktail ring line and can be paired with slim plain bands, smaller butterfly designs or leaf motifs to build a coordinated assortment.
For wholesale and brand development, buyers can review 304 or 316L stainless steel, natural silver tone, black, rose gold or PVD gold plating, specified sizes and inside-band branding by inquiry.
Updated
Buyer notes
- Trend
- Nature motifs remain strong in fashion jewellery, while enamel colour blocking gives buyers an easy way to refresh one mould for different seasons and markets. The butterfly silhouette also provides clear search and merchandising identity.
- Positioning
- This is a hero or upper-core statement piece for boutiques, online fashion jewellery channels, department-store accessories and resort shops. Cost is mainly driven by the large cast butterfly head, fine relief lines, multiple recessed fill areas and hand finishing around the details.
- Building a range
- Build a coordinated butterfly and botanical range with this as the hero head, then add smaller butterfly, leaf and plain polished bands. Keep gold tone with white fill as the core colour story and use black or seasonal enamel as an alternate story.
Customize this design
Pick what to change. Your brief shows whether new tooling is needed, where the cost goes and how to save. We quote from it.
Custom orders we have made
- The request
- The buyer chose three designs from our samples, but her customers do not buy open rings. She also wanted a three-ring stacking set split across sizes.
- What we did
- Because the designs already had moulds, we modified them to closed bands instead of making new moulds. One design she sent had a brushed finish we could not match, so we told her before ordering rather than after.
- Result
- The three-ring set was ordered in four sizes (US 8 to 11), with the closed versions of the three designs planned for the next order.
- The request
- The brand needed 8 mm stainless steel outer shells for its smart ring, with a new surface pattern, gold plating with a green colour fill, and its lettering on the shell.
- What we did
- We made a sample first. After review, the green fill was adjusted brighter to the brand's colour reference, the lettering was laser-marked, and an extra ring size was sampled from the same model when the brand needed it.
- Result
- Bulk planned in black and gold across five sizes, followed by samples of three further shell designs for a larger order.
Specifications
Specs describe the photographed sample; all can change for your order. Tags show the source: factory-confirmed, measured, or AI estimate from photos (checked before we quote).
Ring
- Design code
- N002835
- Ring type
- Cocktail ring
- Silhouette
- Raised four-wing butterfly plaque on a round band
- Band
- Medium-width rounded shank
- Top
- Four-wing butterfly with white-filled decorative wing panels and a raised central body
Decoration
- Stone
- No stones
- Stone colours
- None
- How stones are fixed
- None
- Pattern
- Butterfly
- Surface finish
- High-polish gold-tone surface with glossy white enamel or resin-glaze fills
Sample specs
- Material
- Confirmed with quote
- Plating
- Confirmed with quote
- Weight
- Confirmed with quote
- Dimensions
- Top about 23 × 24 mm, ring height about 36 mm (est.) AI estimate
Style & use
- Style
- Vintage-inspired, Classic, Ornate
- Theme
- Butterfly
- Categories
- Enamel, Cocktail ring, Statement, Vintage
- Who it suits
- Women
- Fits these lines
- Butterfly motif collection, Enamel statement cocktail ring line, Nature-inspired fashion jewellery range, Boutique seasonal assortment
Structure & craft
Parts, sizes and how the ring is made, for designers and developers. “Est.” sizes are estimated from proportions.
The ring is modelled as a smooth circular shank carrying a single cast butterfly head. Four wing lobes have recessed cells filled with white enamel or resin glaze, while the perimeter, vein lines and segmented body remain raised and polished; the head and shank appear joined as one cast piece.
- 11 parts
- No stones
- One-piece lost-wax cast ring with an integrated butterfly head and recessed fill panels
- Fully symmetric
- Closed band
Ring anatomy
Rounded shankBand
Smooth circular band; High-polish gold-tone surface. Continuous circular band supporting the butterfly head; the interior appears smooth and polished.
Full details
- Where
- Full ring circumference beneath and behind the butterfly head
- Shape
- Smooth circular band
- Profile
- Half-round
- Surface
- High-polish gold-tone surface
- Colour
- Gold tone
Butterfly head baseHead
Four-wing butterfly plaque with rounded lobe ends; Polished border with raised relief framework. Integrated cast top carrying four wing lobes, recessed fill cells and raised relief details.
Full details
- Where
- Top of the ring above the shank
- Shape
- Four-wing butterfly plaque with rounded lobe ends
- Surface
- Polished border with raised relief framework
- Colour
- Gold tone
Upper left wing reliefRelief motif
Elongated rounded wing lobe; Polished gold-tone frame and raised relief lines. Integrated rounded wing lobe with raised vein divisions and ornamental marks.
Full details
- Where
- Upper left of the butterfly head
- Shape
- Elongated rounded wing lobe
- Surface
- Polished gold-tone frame and raised relief lines
- Colour
- Gold tone
Upper right wing reliefRelief motif
Elongated rounded wing lobe; Polished gold-tone frame and raised relief lines. Integrated rounded wing lobe mirroring the opposite upper wing.
Full details
- Where
- Upper right of the butterfly head
- Shape
- Elongated rounded wing lobe
- Surface
- Polished gold-tone frame and raised relief lines
- Colour
- Gold tone
Lower left wing reliefRelief motif
Broad rounded wing lobe; Polished gold-tone frame and raised decorative relief. Integrated lower wing lobe with broader rounded end and several recessed cells.
Full details
- Where
- Lower left of the butterfly head
- Shape
- Broad rounded wing lobe
- Surface
- Polished gold-tone frame and raised decorative relief
- Colour
- Gold tone
Lower right wing reliefRelief motif
Broad rounded wing lobe; Polished gold-tone frame and raised decorative relief. Integrated lower wing lobe mirroring the opposite lower wing.
Full details
- Where
- Lower right of the butterfly head
- Shape
- Broad rounded wing lobe
- Surface
- Polished gold-tone frame and raised decorative relief
- Colour
- Gold tone
Raised butterfly body and antennaeRelief motif
Narrow segmented butterfly body with short antennae; High-polish raised gold-tone relief. Central raised cast relief with small rounded body segments and short antennae; it is not a separate stone setting.
Full details
- Where
- Centre of the butterfly head between the four wings
- Shape
- Narrow segmented butterfly body with short antennae
- Surface
- High-polish raised gold-tone relief
- Colour
- Gold tone
Upper left wing fillEnamel area
Several elongated irregular wing cells; Glossy white enamel or resin glaze. Multiple white-filled recessed cells inside the upper left wing; not a separate stone.
Full details
- Where
- Recessed panels within the upper left wing
- Shape
- Several elongated irregular wing cells
- Surface
- Glossy white enamel or resin glaze
- Colour
- White
Upper right wing fillEnamel area
Several elongated irregular wing cells; Glossy white enamel or resin glaze. Multiple white-filled recessed cells inside the upper right wing.
Full details
- Where
- Recessed panels within the upper right wing
- Shape
- Several elongated irregular wing cells
- Surface
- Glossy white enamel or resin glaze
- Colour
- White
Lower left wing fillEnamel area
Several elongated irregular wing cells; Glossy white enamel or resin glaze. Multiple white-filled recessed cells inside the lower left wing.
Full details
- Where
- Recessed panels within the lower left wing
- Shape
- Several elongated irregular wing cells
- Surface
- Glossy white enamel or resin glaze
- Colour
- White
Lower right wing fillEnamel area
Several elongated irregular wing cells; Glossy white enamel or resin glaze. Multiple white-filled recessed cells inside the lower right wing.
Full details
- Where
- Recessed panels within the lower right wing
- Shape
- Several elongated irregular wing cells
- Surface
- Glossy white enamel or resin glaze
- Colour
- White
Key dimensions
- Silhouette
- Four-wing butterfly plaque on a rounded circular band
- Symmetry
- Fully symmetric
- Head W × L × H
- 23 mm Est. × 24 mm Est. × 5.2 mm Est.
- Main stone size
- No stone
- Band width (top / bottom)
- 3.6 mm Est. / 3.3 mm Est.
- Ring height
- 36 mm Est.
- Inner diameter
- 17.5 mm Est. Sample estimated at US 7; sizes made to order
- Open ring
- No, closed band
How the parts fit together
- Butterfly head basefixed toRounded shank
The butterfly head base is fixed to the rounded shankThe head and shank appear to be formed as one continuous cast ring body.
- Upper left wing relieffixed toButterfly head base
The upper left wing relief is fixed to the butterfly head baseIntegrated cast wing relief on the butterfly head.
- Upper right wing relieffixed toButterfly head base
The upper right wing relief is fixed to the butterfly head baseIntegrated cast wing relief on the butterfly head.
- Lower left wing relieffixed toButterfly head base
The lower left wing relief is fixed to the butterfly head baseIntegrated cast wing relief on the butterfly head.
- Lower right wing relieffixed toButterfly head base
The lower right wing relief is fixed to the butterfly head baseIntegrated cast wing relief on the butterfly head.
- Upper left wing fillinlaid inUpper left wing relief
The upper left wing fill is inlaid flush into the upper left wing reliefWhite fill occupies recessed cells in the upper left wing.
- Upper right wing fillinlaid inUpper right wing relief
The upper right wing fill is inlaid flush into the upper right wing reliefWhite fill occupies recessed cells in the upper right wing.
- Lower left wing fillinlaid inLower left wing relief
The lower left wing fill is inlaid flush into the lower left wing reliefWhite fill occupies recessed cells in the lower left wing.
- Lower right wing fillinlaid inLower right wing relief
The lower right wing fill is inlaid flush into the lower right wing reliefWhite fill occupies recessed cells in the lower right wing.
- Raised butterfly body and antennaeraised onButterfly head base
The raised butterfly body and antennae stands out in relief on the butterfly head baseRaised cast relief above the centre of the butterfly head.
Manufacturing
- Thin wing edges and antennae may distort during casting or finishing
- Fine relief lines can be softened by over-polishing
- Enamel or resin glaze may overflow narrow recess edges or chip during handling
- Coloured coating can pool differently around deep relief and recessed panels
- The filled wing panels need a clear approved colour and boundary standard
How this ring is made
9 steps from mould to shipping. Your brief above shows which steps your changes affect.
Shaping the ring
- Wax model
Wax is injected into a rubber mould to make an exact copy of the ring. Each design and size has its own mould.
On this ring: Create a wax copy of the rounded shank and raised four-wing butterfly head; each ordered size uses its own wax tooling.
- Casting
The wax copy is set in plaster and melted out; molten steel fills the hollow. This is lost-wax casting.
On this ring: Cast the shank and butterfly head as one main ring piece, including the recessed wing cells and raised relief lines.
- Trimming
The casting stub is cut off and ground smooth.
On this ring: Cut away the casting stub and smooth the gate area before detailed finishing.
Surface & colour
- Polishing
The ring is ground and polished to its final shine.
On this ring: Polish the rounded shank, butterfly borders and raised relief while keeping the recessed enamel cells defined.
- Plating
A coloured coating (gold, rose gold, black…) is applied to the steel. Colour and coating thickness are set here; thicker coatings last longer.
On this ring: Apply the selected gold-tone or other coloured coating to the prepared metal surface.
Details & stones
- Enamel filling
Coloured enamel or resin glaze is filled into the recesses by hand and cured to a glossy finish. Each extra colour adds a step.
On this ring: Fill the recessed wing panels with white enamel or resin glaze and cure them to a glossy finish.
Check, pack & ship
- Quality check
Each piece is checked against the approved sample for finish, colour, size, weight and stone security. Rejects are reworked.
On this ring: Check the approved butterfly relief, fill boundaries, plating colour, ring size and finish, including the security of the filled panels.
- Packing
We pack free with your packaging: bags, boxes, labels, sorted by size.
On this ring: Pack pieces by confirmed size and colour, with branded packaging or labels if ordered.
- Shipping
Cartons are marked, listed and sent by courier, air or sea, with tracking.
On this ring: Pack cartons with shipping marks and the packing list for the buyer's selected freight method.
Ways to derive similar designs
| What changes | Tooling | Examples |
|---|---|---|
| Plating colour | Same mould | Gold tone, Rose gold, Black, Natural silver tone |
| Enamel colour | Same mould | White, Black, One requested brand colour |
| Number of enamel colours | Same mould | Single-colour fill, Two-colour upper and lower wings |
| Butterfly wing relief pattern | New mould | Current fine vein relief, Simplified cast relief |
| Top motif | New mould | Butterfly, Leaf or flower motif |
| Band width and profile | New mould | Current rounded shank, Wider or tapered shank |
| Inside branding | Same mould | Laser-etched logo, Raised cast-in logo |
| Ring size | New mould | Requested size range and split |
What the photos show
Other ways to make this design
The sample is the gold colour variant with white enamel or resin-glaze fills on a polished butterfly head. Buyers can specify 304 or 316L stainless steel, plating, enamel colours, ring sizes and inside branding to fit their range; send quantity and requirements for review.
4 changes on the existing mould
- 1Choose 304 stainless steel instead of 316L stainless steel
A lower-cost material route for entry-level ranges
- 2Specify no plating, black, rose gold, 14K, 18K or 24K PVD gold plating
Build a silver-tone, black, rose-gold or gold-tone colour story
- 3Change the white enamel or resin-glaze fill to a requested colour
Match the butterfly design to a seasonal or brand colour palette
- 4Add an inside-band engraving or laser logo
Create a branded piece without changing the visible butterfly face
- 5Specify the ring size range and size split per order
Fit the design to a planned size split
Before you order
What buyers ask most, and what most often goes wrong later.
Why stones come loose, and how to avoid it
Our stones are glued into cast seats. They come loose when a stone doesn’t fit its seat, or from knocks in transit. Confirm stone type (glass / cubic zirconia) and size when ordering, and ask for a piece-by-piece stone check if you need one.
Will the plating fade? How long does it last?
We use vacuum (PVD) plating, which wears better than standard electroplating. Colour life depends on coating thickness, wear and chemicals. Specify thickness to match your after-sales needs. If engraved or etched text must resist solvents, tell us first.
304 or 316L steel?
316L resists corrosion better and suits long skin contact and sensitive skin; 304 costs less and suits fast-fashion lines. For EU/US markets, 316L is recommended.
Size accuracy and size split
Each size has its own mould, made to US sizing. Give quantity per size and any tolerance (e.g. 7:2, 8:4, 9:4, 10:2). Women’s rings usually run US 6–10, men’s 8–13; other sizes need mould work.
The approved sample is the standard
Bulk matches the approved sample in style, colour, stones and weight. Photos can differ in colour, so confirm key colours on the sample. Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview; bulk starts after sample approval and deposit.
Which logo method?
Laser marking and etching need no mould change; raised text does. Etching happens before plating. Send your logo file, position and size. From US$300.
Is the motif sellable in your market?
Some motifs (e.g. snakes, religious symbols) are restricted in some countries or platforms. Tell us where you sell and we’ll flag risks first.
How custom orders work
- 1Send your brief
Use the planner above to list changes and order details.
- 2Review & quote
We confirm feasibility, tooling and unit price. MOQ 100 pcs per design per colour, mixed sizes.
- 3Tooling & sample
Same-mould changes go straight to sampling. New designs start with CAD and tooling (from US$100, mould included; the cost is credited to your bulk order). Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview.
- 4Production
Bulk takes about 35–45 days from sample approval and deposit: wax → casting → sprue grinding → polishing → plating → enamel / stone gluing → packing.
- 5QC & shipping
Inspected against the approved sample, packed and shipped.
Frequently asked questions
What is the MOQ for this ring?
MOQ is 100 pcs per design per colour, mixed sizes. New design samples from US$100, mould included; the cost is credited to your bulk order.
Can I order this design with my logo?
Yes. Laser or etched logo on orders from US$300. Send us your packaging and we pack it free, or we can recommend a supplier.
What are the specifications of the photographed sample?
The sample is the gold colour variant with white enamel or resin-glaze fills in the butterfly wings. Material, plating specification, size split and weight can be confirmed for the order, and the approved sample becomes the production standard.
Can we change the material, plating or colour to lower cost or match our range?
Yes. The design can be reviewed in 304 or 316L stainless steel with 24K, 18K or 14K PVD gold, rose-gold, black or no plating. White enamel can also change to a requested colour; send quantity and requirements with the inquiry.
Can the order include mixed ring sizes?
Yes. Ring sizes are specified per order, and sizes can be mixed within the requested order split. Confirm the target market size chart before sampling.
How is the white butterfly detail made, and can it be changed?
The white detail is filled into recessed wing cells as enamel or resin glaze, rather than set as stones. The same mould can support a same-size colour change, while a new wing shape or relief pattern needs tooling review.
What order information should a wholesale buyer provide?
The MOQ is 100 pieces per design per colour, and sizes can be mixed. Send the required colour, material, size split, enamel choice and branding details for review.