Colour: Green & pink stones
Design N002793GQFV
Silver Tone Green and Pink Baguette Crystal Double Band Stainless Steel Open Ring
Silver Tone Green and Pink Baguette Crystal Double Band Stainless Steel Open Ring is an open ring in 316L stainless steel. MOQ 100 pcs per design per colour; samples from US$100.
A women's open ring on a double wire band, with a green and a pink emerald-cut baguette crystal in long bezels, set parallel and offset across the finger.
Free proposal and quote · reply within 24 hours
- Ring type
- Open ring
- Style
- Colourful, Modern
- Sample material
- 316L stainless steel Factory-confirmed
- Sample weight
- 8 g AI estimate
- Top size
- 14 × 28 mm AI estimate
Pick a colour to start
The sample is one option. Change colour, material, plating, stones or branding to fit your budget.
- MOQ 100 pcs per design per colour; mix sizes, not colours
- Existing mould: made as sampled. Changes that need a new mould are sampled as a new design (from US$100, mould included; the cost is credited to your bulk order)
- Samples ship 15–20 days after approval, with a 3D print and stone-setting preview
- Bulk about 35–45 days from sample approval and deposit
- Bulk payment: 30% deposit, 70% balance before shipment; any sample cost you paid comes off the balance
- 6 common changes need no new mould
Your quote comes with a PDF spec sheet.
About this design
Two long baguette crystals, one green and one pink, lie parallel across the finger, offset so together they span about 28 mm.
Each stone sits in a smooth, slim bezel that follows its clean rectangular line.
Two parallel wires form the band and meet in a U-shaped loop at the back, so the ring opens slightly and fits most fingers.
The sample is 316L steel, about 8 g; any baguette crystal colours of the same size fit the same mould.
Updated
Buyer notes
- Trend
- Colour-block baguettes give a graphic, modern take on coloured stones that suits fashion-forward ranges.
- Positioning
- A core piece: one size and many possible colour pairs on one mould.
- Building a range
- Pair with N002791GQFL cushion crystal ring for a candy-colour story.
Customize this design
Pick what to change. Your brief shows whether new tooling is needed, where the cost goes and how to save. We quote from it.
Custom orders we have made
- The request
- The buyer chose three designs from our samples, but her customers do not buy open rings. She also wanted a three-ring stacking set split across sizes.
- What we did
- Because the designs already had moulds, we modified them to closed bands instead of making new moulds. One design she sent had a brushed finish we could not match, so we told her before ordering rather than after.
- Result
- The three-ring set was ordered in four sizes (US 8 to 11), with the closed versions of the three designs planned for the next order.
- The request
- The brand needed 8 mm stainless steel outer shells for its smart ring, with a new surface pattern, gold plating with a green colour fill, and its lettering on the shell.
- What we did
- We made a sample first. After review, the green fill was adjusted brighter to the brand's colour reference, the lettering was laser-marked, and an extra ring size was sampled from the same model when the brand needed it.
- Result
- Bulk planned in black and gold across five sizes, followed by samples of three further shell designs for a larger order.
Specifications
Specs describe the photographed sample; all can change for your order. Tags show the source: factory-confirmed, measured, or AI estimate from photos (checked before we quote).
Ring
- Design code
- N002793GQFV
- Ring type
- Open ring
- Silhouette
- Double baguette on a double band
- Band
- Two parallel wires joined at the back
- Top
- Two offset baguette crystals
- Adjustable
- Yes
Decoration
- Stone
- Baguette (emerald cut) crystal ×1; Baguette (emerald cut) crystal ×1 AI estimate
- Stone colours
- Green; Pink
- How stones are fixed
- Glued into a cast bezel; Glued into a cast bezel
- Pattern
- Colour block
- Surface finish
- High polish
Sample specs
- Material
- 316L stainless steel Factory-confirmed
- Plating
- Confirmed with quote
- Weight
- 8 g AI estimate
- Dimensions
- stones 28 mm across, ring height 24 mm AI estimate
Style & use
- Style
- Colourful, Modern
- Theme
- Colour block
- Categories
- Open ring, Crystal, Modern sculptural
- Who it suits
- Women
- Fits these lines
- Colour block edit, Candy colour edit, One-size open ring line
Structure & craft
Parts, sizes and how the ring is made, for designers and developers. “Est.” sizes are estimated from proportions.
Four parts: a green and a pink baguette crystal, a slim long bezel for each, and a double wire band that joins in a U-shaped loop at the back. The metal is cast in one piece and polished, then the crystals are glued into their bezels.
- 4 parts
- 2 stones
- One-piece lost-wax casting in stainless steel, open ends shaped after casting
- Asymmetric
- Open, adjustable
Ring anatomy
Green baguette crystalStone
Long emerald-cut rectangle; Step-cut facets.
Full details
- Where
- Front, lower
- Shape
- Long emerald-cut rectangle
- Surface
- Step-cut facets
- Colour
- Green
Pink baguette crystalStone
Long emerald-cut rectangle; Step-cut facets.
Full details
- Where
- Front, upper
- Shape
- Long emerald-cut rectangle
- Surface
- Step-cut facets
- Colour
- Pink
Long bezelsFrame / bezel×2
Slim rectangular cups; High polish.
Full details
- Where
- Around each crystal
- Shape
- Slim rectangular cups
- Profile
- Rounded
- Surface
- High polish
- Colour
- Steel
Double wire bandBand
Two parallel wires joined by a U-loop at the back; High polish.
Full details
- Where
- Around the finger
- Shape
- Two parallel wires joined by a U-loop at the back
- Profile
- Round wire
- Surface
- High polish
- Colour
- Steel
Key dimensions
- Silhouette
- Double baguette on a double band
- Symmetry
- Asymmetric
- Head W × L × H
- 14 mm Est. × 28 mm × 4.5 mm Est.
- Main stone size
- 7 mm Est. × 16 mm Est.
- Band width (top / bottom)
- 14 mm Est. / 6 mm Est.
- Ring height
- 24 mm
- Inner diameter
- 17.5 mm Est. Sample estimated at US 7; sizes made to order
- Open ring
- Yes, adjustable
How the parts fit together
- Green baguette crystalfixed intoLong bezels
The green baguette crystal is fixed into the long bezels
Fixed by: Stone gluing into cast seats - Pink baguette crystalfixed intoLong bezels
The pink baguette crystal is fixed into the long bezels
Fixed by: Stone gluing into cast seats - Long bezelsfixed toDouble wire band
The long bezels are fixed to the double wire band
Other ways to fix the stones
Each method changes security, sparkle and cost. Moving off glue setting usually needs a new mould.
- Glue settingThis design
The stone is glued into a cast seat. Lowest cost and fastest; the usual method for fashion steel jewellery.
- Bezel settingTo confirm · usually new mould
A metal rim wraps the whole stone. Very secure and hard to lose, but covers part of the stone.
- Prong settingTo confirm · usually new mould
Metal claws hold the stone, letting in more light for extra sparkle; suits large faceted stones.
- Pavé / micro settingTo confirm · usually new mould
Many small stones are held by tiny metal beads to form a sparkling surface.
- Channel settingTo confirm · usually new mould
Stones sit in a row between two metal rails; smooth and snag-free.
Manufacturing
- Long thin crystals need an even glue line along the whole bezel
- U-loop back must flex without cracking
How this ring is made
8 steps from mould to shipping. Your brief above shows which steps your changes affect.
Shaping the ring
- Wax model
Wax is injected into a rubber mould to make an exact copy of the ring. Each design and size has its own mould.
On this ring: One open size fits most fingers, so a single mould
- Casting
The wax copy is set in plaster and melted out; molten steel fills the hollow. This is lost-wax casting.
On this ring: Bezels and double band cast as one piece
- Trimming
The casting stub is cut off and ground smooth.
Surface & colour
- Polishing
The ring is ground and polished to its final shine.
On this ring: Bezels and wires polished
Details & stones
- Stone setting
Stones, zirconia or pearls are glued into cast seats. Seat size is set by the mould, so same-size colour swaps are easy.
On this ring: Green and pink baguettes glued into their bezels
Check, pack & ship
- Quality check
Each piece is checked against the approved sample for finish, colour, size, weight and stone security. Rejects are reworked.
On this ring: Check the crystals sit level and the back loop flexes
- Packing
We pack free with your packaging: bags, boxes, labels, sorted by size.
- Shipping
Cartons are marked, listed and sent by courier, air or sea, with tracking.
Ways to derive similar designs
| What changes | Tooling | Examples |
|---|---|---|
| Crystal colours (same size) | Same mould | Blue and yellow, purple and clear |
| Stone count | New mould | Three baguettes |
| Metal colour | Same mould | Gold, steel (silver tone) |
What the photos show
Other ways to make this design
The sample is natural 316L steel with green and pink crystals. Any baguette crystal colours of the same size, gold plating and 304 steel use the same mould.
6 changes on the existing mould
- 1Other colour pairs (blue and yellow, purple and clear)
A colour-block range
- 2Gold plating
Warmer look
- 3Cubic zirconia instead of glass crystal
More sparkle
- 4304 steel
Lower unit cost
Before you order
What buyers ask most, and what most often goes wrong later.
Why stones come loose, and how to avoid it
Our stones are glued into cast seats. They come loose when a stone doesn’t fit its seat, or from knocks in transit. Confirm stone type (glass / cubic zirconia) and size when ordering, and ask for a piece-by-piece stone check if you need one.
Will the plating fade? How long does it last?
We use vacuum (PVD) plating, which wears better than standard electroplating. Colour life depends on coating thickness, wear and chemicals. Specify thickness to match your after-sales needs. If engraved or etched text must resist solvents, tell us first.
304 or 316L steel?
316L resists corrosion better and suits long skin contact and sensitive skin; 304 costs less and suits fast-fashion lines. For EU/US markets, 316L is recommended.
Size accuracy and size split
Each size has its own mould, made to US sizing. Give quantity per size and any tolerance (e.g. 7:2, 8:4, 9:4, 10:2). Women’s rings usually run US 6–10, men’s 8–13; other sizes need mould work.
The approved sample is the standard
Bulk matches the approved sample in style, colour, stones and weight. Photos can differ in colour, so confirm key colours on the sample. Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview; bulk starts after sample approval and deposit.
Which logo method?
Laser marking and etching need no mould change; raised text does. Etching happens before plating. Send your logo file, position and size. From US$300.
Is the motif sellable in your market?
Some motifs (e.g. snakes, religious symbols) are restricted in some countries or platforms. Tell us where you sell and we’ll flag risks first.
How custom orders work
- 1Send your brief
Use the planner above to list changes and order details.
- 2Review & quote
We confirm feasibility, tooling and unit price. MOQ 100 pcs per design per colour, mixed sizes.
- 3Tooling & sample
Same-mould changes go straight to sampling. New designs start with CAD and tooling (from US$100, mould included; the cost is credited to your bulk order). Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview.
- 4Production
Bulk takes about 35–45 days from sample approval and deposit: wax → casting → sprue grinding → polishing → plating → enamel / stone gluing → packing.
- 5QC & shipping
Inspected against the approved sample, packed and shipped.
Frequently asked questions
What is the MOQ for this ring?
MOQ is 100 pcs per design per colour, mixed sizes. New design samples from US$100, mould included; the cost is credited to your bulk order.
Can I order this design with my logo?
Yes. Laser or etched logo on orders from US$300. Send us your packaging and we pack it free, or we can recommend a supplier.
Can we choose our own colour pairs?
Yes. Any baguette crystals of the same size fit the existing bezels.
Is the ring adjustable?
Yes. The U-shaped loop at the back lets the band open slightly, so one size fits most fingers.
Can it be gold?
Yes. Full gold plating, or gold bezels on a steel band, use the same mould.
What is the sample made of?
The sample is 316L stainless steel, about 8 g. Material, plating and colour can be re-specified for your budget.
Can it be made at a lower cost?
Choose 304 steel, keep glass stones, and order fewer colours with more pieces per colour. Laser logos add brand identity without mould costs.