Colour: Steel
Design E00470
Silver Tone Pearl and Cushion Crystal Stainless Steel Open Bypass Ring for Women
Silver Tone Pearl and Cushion Crystal Stainless Steel Open Bypass Ring for Women is a bypass ring in 316L stainless steel. MOQ 100 pcs per design per colour; samples from US$100.
A women's open bypass ring with a white pearl on one end and, on the other, a large cushion-cut clear crystal and a small round crystal side by side in smooth polished bezels.
Free proposal and quote · reply within 24 hours
- Ring type
- Bypass ring
- Style
- Modern, Classic
- Sample material
- 316L stainless steel Factory-confirmed
- Sample weight
- 7.5 g AI estimate
- Top size
- 14 × 20 mm AI estimate
Pick a colour to start
The sample is one option. Change colour, material, plating, stones or branding to fit your budget.
- MOQ 100 pcs per design per colour; mix sizes, not colours
- Existing mould: made as sampled. Changes that need a new mould are sampled as a new design (from US$100, mould included; the cost is credited to your bulk order)
- Samples ship 15–20 days after approval, with a 3D print and stone-setting preview
- Bulk about 35–45 days from sample approval and deposit
- Bulk payment: 30% deposit, 70% balance before shipment; any sample cost you paid comes off the balance
- 6 common changes need no new mould
Your quote comes with a PDF spec sheet.
About this design
The two ends of the band pass each other on top: one finishes in a round white pearl, the other in a cluster of two crystals.
The main crystal is a 12 mm cushion cut in a thick, smooth bezel, with a 7 mm round crystal beside it.
The mix of pearl and faceted crystal gives a modern take on classic pearl jewellery, and the 20 mm top makes a clear statement.
Crystal colours can change on the same mould, so the design can follow seasonal colour stories.
Updated
Buyer notes
- Trend
- Pearls mixed with crystals are a strong modern-pearl trend, and bypass shapes keep selling in occasion and bridal edits.
- Positioning
- A core-to-hero piece for boutiques and occasion wear; the large crystal and pearl drive the cost.
- Building a range
- Run the cushion crystal in four seasonal colours on one mould, and pair with simple pearl bands such as E00477.
Customize this design
Pick what to change. Your brief shows whether new tooling is needed, where the cost goes and how to save. We quote from it.
Custom orders we have made
- The request
- The buyer chose three designs from our samples, but her customers do not buy open rings. She also wanted a three-ring stacking set split across sizes.
- What we did
- Because the designs already had moulds, we modified them to closed bands instead of making new moulds. One design she sent had a brushed finish we could not match, so we told her before ordering rather than after.
- Result
- The three-ring set was ordered in four sizes (US 8 to 11), with the closed versions of the three designs planned for the next order.
- The request
- The brand needed 8 mm stainless steel outer shells for its smart ring, with a new surface pattern, gold plating with a green colour fill, and its lettering on the shell.
- What we did
- We made a sample first. After review, the green fill was adjusted brighter to the brand's colour reference, the lettering was laser-marked, and an extra ring size was sampled from the same model when the brand needed it.
- Result
- Bulk planned in black and gold across five sizes, followed by samples of three further shell designs for a larger order.
Specifications
Specs describe the photographed sample; all can change for your order. Tags show the source: factory-confirmed, measured, or AI estimate from photos (checked before we quote).
Ring
- Design code
- E00470
- Ring type
- Bypass ring
- Silhouette
- Open bypass with a stone cluster
- Band
- Slim round band with open overlapping ends
- Top
- Pearl facing a cushion crystal and a round crystal
- Adjustable
- Yes
Decoration
- Stone
- Cushion crystal ×1; Round crystal ×1; Round pearl ×1 AI estimate
- Stone colours
- Clear; Clear; White
- How stones are fixed
- Glued into a cast bezel; Glued into a cast bezel; Glued onto a cup and pin
- Pattern
- Pearl and crystal cluster
- Surface finish
- High polish
Sample specs
- Material
- 316L stainless steel Factory-confirmed
- Plating
- Confirmed with quote
- Weight
- 7.5 g AI estimate
- Dimensions
- top 20 mm wide, ring height 29 mm AI estimate
Style & use
- Style
- Modern, Classic
- Theme
- Pearl and crystal cluster
- Categories
- Open ring, Statement, Pearl, Crystal, Modern sculptural
- Who it suits
- Women
- Fits these lines
- Modern pearl edit, Bridal and occasion line, Statement ring line
Structure & craft
Parts, sizes and how the ring is made, for designers and developers. “Est.” sizes are estimated from proportions.
Four parts: a slim open band whose two ends pass each other on top; a white pearl on a cup at one end; and at the other end a large cushion crystal and a small round crystal, each in its own smooth bezel. The metal is cast in one piece and polished, then the crystals are glued into the bezels and the pearl glued on its pin.
- 5 parts
- 3 stones
- One-piece lost-wax casting in stainless steel, open ends shaped after casting
- Asymmetric
- Open, adjustable
Ring anatomy
Cushion crystalStone
Cushion-cut, faceted; Faceted.
Full details
- Where
- Top, one band end
- Shape
- Cushion-cut, faceted
- Surface
- Faceted
- Colour
- Clear
Round crystalStone
Round brilliant; Faceted.
Full details
- Where
- Beside the cushion crystal
- Shape
- Round brilliant
- Surface
- Faceted
- Colour
- Clear
Smooth bezelsFrame / bezel×2
Thick rounded cups; High polish.
Full details
- Where
- Around each crystal
- Shape
- Thick rounded cups
- Profile
- Rounded
- Surface
- High polish
- Colour
- Steel
White pearlPearl
Round; Lustrous. Shell or glass pearl; specified with the quote.
Full details
- Where
- Top, other band end
- Shape
- Round
- Surface
- Lustrous
- Colour
- White
Open bypass bandBand
Slim band with ends passing on top; High polish.
Full details
- Where
- Around the finger
- Shape
- Slim band with ends passing on top
- Profile
- Round
- Surface
- High polish
- Colour
- Steel
Key dimensions
- Silhouette
- Open bypass with a stone cluster
- Symmetry
- Asymmetric
- Head W × L × H
- 14 mm Est. × 20 mm × 9.5 mm Est.
- Main stone size
- 12 mm Est. × 12 mm Est.
- Band width (top / bottom)
- 20 mm / 2.5 mm Est.
- Ring height
- 29 mm
- Inner diameter
- 17.5 mm Est. Sample estimated at US 7; sizes made to order
- Open ring
- Yes, adjustable
How the parts fit together
- Cushion crystalfixed intoSmooth bezels
The cushion crystal is fixed into the smooth bezels
Fixed by: Stone gluing into cast seats, pearl glued onto a cast cup and pin - Round crystalfixed intoSmooth bezels
The round crystal is fixed into the smooth bezels
Fixed by: Stone gluing into cast seats, pearl glued onto a cast cup and pin - White pearlfixed toOpen bypass band
The white pearl is fixed to the open bypass bandGlued onto a cup and pin at the band end.
- Smooth bezelsfixed toOpen bypass band
The smooth bezels are fixed to the open bypass band
Other ways to fix the stones
Each method changes security, sparkle and cost. Moving off glue setting usually needs a new mould.
- Glue settingThis design
The stone is glued into a cast seat. Lowest cost and fastest; the usual method for fashion steel jewellery.
- Bezel settingTo confirm · usually new mould
A metal rim wraps the whole stone. Very secure and hard to lose, but covers part of the stone.
- Prong settingTo confirm · usually new mould
Metal claws hold the stone, letting in more light for extra sparkle; suits large faceted stones.
- Pavé / micro settingTo confirm · usually new mould
Many small stones are held by tiny metal beads to form a sparkling surface.
- Channel settingTo confirm · usually new mould
Stones sit in a row between two metal rails; smooth and snag-free.
Manufacturing
- Large crystal needs an even glue layer in a deep bezel
- Pearl pin must be glued straight so the pearl sits centred
- Bypass ends must line up neatly on top
How this ring is made
8 steps from mould to shipping. Your brief above shows which steps your changes affect.
Shaping the ring
- Wax model
Wax is injected into a rubber mould to make an exact copy of the ring. Each design and size has its own mould.
On this ring: One rubber mould per ring size
- Casting
The wax copy is set in plaster and melted out; molten steel fills the hollow. This is lost-wax casting.
On this ring: Band, bezels and pearl cup cast as one piece
- Trimming
The casting stub is cut off and ground smooth.
Surface & colour
- Polishing
The ring is ground and polished to its final shine.
On this ring: Bezels and band polished to a mirror
Details & stones
- Stone setting
Stones, zirconia or pearls are glued into cast seats. Seat size is set by the mould, so same-size colour swaps are easy.
On this ring: Two crystals glued into their bezels; pearl glued onto its pin
Check, pack & ship
- Quality check
Each piece is checked against the approved sample for finish, colour, size, weight and stone security. Rejects are reworked.
On this ring: Check the crystals are level and the pearl is secure
- Packing
We pack free with your packaging: bags, boxes, labels, sorted by size.
- Shipping
Cartons are marked, listed and sent by courier, air or sea, with tracking.
Ways to derive similar designs
| What changes | Tooling | Examples |
|---|---|---|
| Crystal colour (same size) | Same mould | Aqua, pink, champagne |
| Pearl colour | Same mould | Grey, champagne |
| Main stone shape | New mould | Oval, pear |
| Metal colour | Same mould | Gold, steel (silver tone) |
What the photos show
Other ways to make this design
The sample is natural 316L steel with clear crystals and a white pearl. Crystal colours, pearl colour and gold plating all use the same mould.
6 changes on the existing mould
- 1Coloured cushion crystal (aqua, pink, champagne)
Seasonal colour stories on one mould
- 2Gold plating
Warmer, more classic look
- 3Grey or champagne pearl
A softer colourway
- 4304 steel
Lower unit cost
Before you order
What buyers ask most, and what most often goes wrong later.
Why stones come loose, and how to avoid it
Our stones are glued into cast seats. They come loose when a stone doesn’t fit its seat, or from knocks in transit. Confirm stone type (glass / cubic zirconia) and size when ordering, and ask for a piece-by-piece stone check if you need one.
Will the plating fade? How long does it last?
We use vacuum (PVD) plating, which wears better than standard electroplating. Colour life depends on coating thickness, wear and chemicals. Specify thickness to match your after-sales needs. If engraved or etched text must resist solvents, tell us first.
304 or 316L steel?
316L resists corrosion better and suits long skin contact and sensitive skin; 304 costs less and suits fast-fashion lines. For EU/US markets, 316L is recommended.
Size accuracy and size split
Each size has its own mould, made to US sizing. Give quantity per size and any tolerance (e.g. 7:2, 8:4, 9:4, 10:2). Women’s rings usually run US 6–10, men’s 8–13; other sizes need mould work.
The approved sample is the standard
Bulk matches the approved sample in style, colour, stones and weight. Photos can differ in colour, so confirm key colours on the sample. Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview; bulk starts after sample approval and deposit.
Which logo method?
Laser marking and etching need no mould change; raised text does. Etching happens before plating. Send your logo file, position and size. From US$300.
Is the motif sellable in your market?
Some motifs (e.g. snakes, religious symbols) are restricted in some countries or platforms. Tell us where you sell and we’ll flag risks first.
How custom orders work
- 1Send your brief
Use the planner above to list changes and order details.
- 2Review & quote
We confirm feasibility, tooling and unit price. MOQ 100 pcs per design per colour, mixed sizes.
- 3Tooling & sample
Same-mould changes go straight to sampling. New designs start with CAD and tooling (from US$100, mould included; the cost is credited to your bulk order). Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview.
- 4Production
Bulk takes about 35–45 days from sample approval and deposit: wax → casting → sprue grinding → polishing → plating → enamel / stone gluing → packing.
- 5QC & shipping
Inspected against the approved sample, packed and shipped.
Frequently asked questions
What is the MOQ for this ring?
MOQ is 100 pcs per design per colour, mixed sizes. New design samples from US$100, mould included; the cost is credited to your bulk order.
Can I order this design with my logo?
Yes. Laser or etched logo on orders from US$300. Send us your packaging and we pack it free, or we can recommend a supplier.
Can the crystals be coloured?
Yes. Crystals of the same size and cut fit the existing bezels, so aqua, pink or champagne use the same mould.
Is the ring adjustable?
The ends pass each other on top, so the ring can be eased slightly; we still recommend ordering by size.
What kind of pearl is used?
Shell or glass pearls are common for this design; the type is confirmed with your quote.
What is the sample made of?
The sample is 316L stainless steel, about 7.5 g. Material, plating and colour can be re-specified for your budget.
Can it be made at a lower cost?
Choose 304 steel, keep glass stones, and order fewer colours with more pieces per colour. Laser logos add brand identity without mould costs.