Colour: Gold
Design D0484-A
Round Gold Star Black Enamel Stainless Steel Signet Ring for Men
Round Gold Star Black Enamel Stainless Steel Signet Ring for Men is a signet ring in 316L stainless steel with vacuum PVD plating. MOQ 100 pcs per design per colour; samples from US$100.
A round signet ring with a large polished five-point star raised over black enamel sunburst lines, plus a small star medallion set into each shoulder.
Free proposal and quote · reply within 24 hours
- Ring type
- Signet ring
- Style
- Classic, Vintage
- Top size
- 16 × 16 mm AI estimate
Pick a colour to start
The sample is one option. Change colour, material, plating, stones or branding to fit your budget.
- MOQ 100 pcs per design per colour; mix sizes, not colours
- Existing mould: made as sampled. Changes that need a new mould are sampled as a new design (from US$100, mould included; the cost is credited to your bulk order)
- Samples ship 15–20 days after approval, with a 3D print and stone-setting preview
- Bulk about 35–45 days from sample approval and deposit
- Bulk payment: 30% deposit, 70% balance before shipment; any sample cost you paid comes off the balance
- 6 common changes need no new mould
Your quote comes with a PDF spec sheet.
About this design
A domed five-point star sits at the centre of a round 16 mm face, polished to a mirror shine.
Behind it, fine lines radiate from the centre and are filled with black enamel, so the star stands out like a badge.
Each shoulder carries a small round medallion with a raised star on a frosted dark ground, which ties the sides to the face.
The whole ring is cast in one piece; enamel colour and plating can change on the same mould.
Updated
Buyer notes
- Trend
- Star signets sell across men's fashion, Americana and western ranges, and the round face suits both men and women.
- Positioning
- A core piece for men's accessories, western shops and online fashion; enamel and plating are the main cost drivers.
- Building a range
- Pair with the D0484-B hexagram signet on the same round body, or with the eagle signets, for an emblem table.
Customize this design
Pick what to change. Your brief shows whether new tooling is needed, where the cost goes and how to save. We quote from it.
Custom orders we have made
- The request
- The buyer chose three designs from our samples, but her customers do not buy open rings. She also wanted a three-ring stacking set split across sizes.
- What we did
- Because the designs already had moulds, we modified them to closed bands instead of making new moulds. One design she sent had a brushed finish we could not match, so we told her before ordering rather than after.
- Result
- The three-ring set was ordered in four sizes (US 8 to 11), with the closed versions of the three designs planned for the next order.
- The request
- The brand needed 8 mm stainless steel outer shells for its smart ring, with a new surface pattern, gold plating with a green colour fill, and its lettering on the shell.
- What we did
- We made a sample first. After review, the green fill was adjusted brighter to the brand's colour reference, the lettering was laser-marked, and an extra ring size was sampled from the same model when the brand needed it.
- Result
- Bulk planned in black and gold across five sizes, followed by samples of three further shell designs for a larger order.
Specifications
Specs describe the photographed sample; all can change for your order. Tags show the source: factory-confirmed, measured, or AI estimate from photos (checked before we quote).
Ring
- Design code
- D0484-A
- Ring type
- Signet ring
- Silhouette
- Round signet
- Band
- Wide shoulders tapering to a slim band
- Top
- Raised star over black enamel sunburst
Decoration
- Stone
- No stones
- Stone colours
- None
- How stones are fixed
- None
- Pattern
- Five-point star, Sunburst lines
- Surface finish
- High polish with black enamel lines
Sample specs
- Material
- Confirmed with quote
- Plating
- Confirmed with quote
- Weight
- Confirmed with quote
- Dimensions
- Top about 16 × 16 mm, ring height about 25.5 mm (est.) AI estimate
Structure & craft
Parts, sizes and how the ring is made, for designers and developers. “Est.” sizes are estimated from proportions.
Five parts: a round face with fine radiating lines filled with black enamel, a domed star raised in the middle, a polished rim, two shoulder medallions with small raised stars, and a band that tapers underneath. The metal is cast in one piece, polished and plated, then the lines are filled with enamel.
- 5 parts
- No stones
- One-piece lost-wax casting in stainless steel
- Left–right mirror
- Closed band
Ring anatomy
Domed starRelief motif
Five-point star with ridged arms; Mirror polish.
Full details
- Where
- Centre of the face
- Shape
- Five-point star with ridged arms
- Surface
- Mirror polish
- Colour
- Gold
Black enamel sunburstEnamel area
Fine lines radiating from the centre; Enamel in grooves.
Full details
- Where
- Round face, behind the star
- Shape
- Fine lines radiating from the centre
- Surface
- Enamel in grooves
- Colour
- Black
Polished rimFrame / bezel
Thin round frame; High polish.
Full details
- Where
- Around the face
- Shape
- Thin round frame
- Profile
- Rounded
- Surface
- High polish
- Colour
- Gold
Shoulder star medallionsRelief motif×2
Round recess with a small raised star; Polished star on a frosted dark ground. Left and right are mirror images.
Full details
- Where
- One on each shoulder
- Shape
- Round recess with a small raised star
- Surface
- Polished star on a frosted dark ground
- Colour
- Gold and dark
Tapered bandBand
Plain band narrowing from the shoulders; High polish.
Full details
- Where
- Lower band
- Shape
- Plain band narrowing from the shoulders
- Profile
- Half-round
- Surface
- High polish
- Colour
- Gold
Key dimensions
- Silhouette
- Round signet
- Symmetry
- Left–right mirror
- Head W × L × H
- 16 mm Est. × 16 mm Est. × 6 mm Est.
- Main stone size
- No stone
- Band width (top / bottom)
- 14 mm Est. / 3 mm Est.
- Ring height
- 25.5 mm Est.
- Inner diameter
- 17.5 mm Est. Sample estimated at US 7; sizes made to order
- Open ring
- No, closed band
How the parts fit together
- Domed starraised onBlack enamel sunburst
The domed star stands out in relief on the black enamel sunburst
- Black enamel sunburstinlaid inPolished rim
The black enamel sunburst is inlaid flush into the polished rim
- Shoulder star medallionson both sides ofPolished rim
The shoulder star medallions sit on both sides of the polished rim
- Shoulder star medallionsjoined toTapered band
The shoulder star medallions join the tapered band
Manufacturing
- Enamel must stay inside the fine lines without covering the star
- Star points must cast sharp and polish evenly
- Frosted medallion ground must not be polished away
How this ring is made
9 steps from mould to shipping. Your brief above shows which steps your changes affect.
Shaping the ring
- Wax model
Wax is injected into a rubber mould to make an exact copy of the ring. Each design and size has its own mould.
On this ring: One rubber mould per ring size
- Casting
The wax copy is set in plaster and melted out; molten steel fills the hollow. This is lost-wax casting.
On this ring: Face, star, rim, medallions and band cast as one piece
- Trimming
The casting stub is cut off and ground smooth.
Surface & colour
- Polishing
The ring is ground and polished to its final shine.
On this ring: Star and rim polished to a mirror; medallion ground kept frosted
- Plating
A coloured coating (gold, rose gold, black…) is applied to the steel. Colour and coating thickness are set here; thicker coatings last longer.
On this ring: Gold-tone PVD plating
Details & stones
- Enamel filling
Coloured enamel or resin glaze is filled into the recesses by hand and cured to a glossy finish. Each extra colour adds a step.
On this ring: Black enamel filled into the radiating lines
Check, pack & ship
- Quality check
Each piece is checked against the approved sample for finish, colour, size, weight and stone security. Rejects are reworked.
On this ring: Check the enamel stays in the lines and the star is clean
- Packing
We pack free with your packaging: bags, boxes, labels, sorted by size.
- Shipping
Cartons are marked, listed and sent by courier, air or sea, with tracking.
Ways to derive similar designs
| What changes | Tooling | Examples |
|---|---|---|
| Enamel colour | Same mould | Navy, red, white |
| Face emblem | New mould | Compass, initial, custom crest |
| Shoulder medallion motif | New mould | Logo, smaller star, plain |
| Metal colour | Same mould | Gold, steel (silver tone) |
What the photos show
Other ways to make this design
The sample is gold-tone stainless steel with black enamel. The enamel colour and plating can change on the same mould; the star can be replaced by your own emblem with a new mould.
6 changes on the existing mould
- 1Navy or red enamel lines
A patriotic or team colour story
- 2Steel (silver tone) with black enamel
Lower cost, sharper contrast
- 3304 steel
Lower unit cost
- 4Logo on the shoulder medallions
Brand mark on a signature shape
Before you order
What buyers ask most, and what most often goes wrong later.
Why stones come loose, and how to avoid it
Our stones are glued into cast seats. They come loose when a stone doesn’t fit its seat, or from knocks in transit. Confirm stone type (glass / cubic zirconia) and size when ordering, and ask for a piece-by-piece stone check if you need one.
Will the plating fade? How long does it last?
We use vacuum (PVD) plating, which wears better than standard electroplating. Colour life depends on coating thickness, wear and chemicals. Specify thickness to match your after-sales needs. If engraved or etched text must resist solvents, tell us first.
304 or 316L steel?
316L resists corrosion better and suits long skin contact and sensitive skin; 304 costs less and suits fast-fashion lines. For EU/US markets, 316L is recommended.
Size accuracy and size split
Each size has its own mould, made to US sizing. Give quantity per size and any tolerance (e.g. 7:2, 8:4, 9:4, 10:2). Women’s rings usually run US 6–10, men’s 8–13; other sizes need mould work.
The approved sample is the standard
Bulk matches the approved sample in style, colour, stones and weight. Photos can differ in colour, so confirm key colours on the sample. Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview; bulk starts after sample approval and deposit.
Which logo method?
Laser marking and etching need no mould change; raised text does. Etching happens before plating. Send your logo file, position and size. From US$300.
Is the motif sellable in your market?
Some motifs (e.g. snakes, religious symbols) are restricted in some countries or platforms. Tell us where you sell and we’ll flag risks first.
How custom orders work
- 1Send your brief
Use the planner above to list changes and order details.
- 2Review & quote
We confirm feasibility, tooling and unit price. MOQ 100 pcs per design per colour, mixed sizes.
- 3Tooling & sample
Same-mould changes go straight to sampling. New designs start with CAD and tooling (from US$100, mould included; the cost is credited to your bulk order). Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview.
- 4Production
Bulk takes about 35–45 days from sample approval and deposit: wax → casting → sprue grinding → polishing → plating → enamel / stone gluing → packing.
- 5QC & shipping
Inspected against the approved sample, packed and shipped.
Frequently asked questions
What is the MOQ for this ring?
MOQ is 100 pcs per design per colour, mixed sizes. New design samples from US$100, mould included; the cost is credited to your bulk order.
Can I order this design with my logo?
Yes. Laser or etched logo on orders from US$300. Send us your packaging and we pack it free, or we can recommend a supplier.
Can the black lines be another colour?
Yes. The lines are filled with enamel after casting, so navy, red or white use the same mould.
Is this ring for men or women?
The round face reads as unisex. Order a wider size range for men's lines or smaller sizes for women's lines; sizes can be mixed within the MOQ.
What is the sample made of?
The photos show gold samples. Material grade, plating and weight are confirmed with your quote and can be chosen for your budget.
Can it be made at a lower cost?
Choose 304 steel, keep the enamel to one colour, and order fewer colours with more pieces per colour. Laser logos add brand identity without mould costs.