Colour: Two-tone
Design N002718
Two Tone Silver and Gold Open Flower Outline Stainless Steel Ring for Women
Two Tone Silver and Gold Open Flower Outline Stainless Steel Ring for Women is a flower ring in 316L stainless steel. MOQ 100 pcs per design per colour; samples from US$100.
A light women's ring with a large five-petal flower drawn in polished silver tone outline, a gold-plated domed centre dotted with small dark recesses, and a split band.
Free proposal and quote · reply within 24 hours
- Ring type
- Flower ring
- Style
- Minimal, Romantic
- Sample material
- 316L stainless steel Factory-confirmed
- Sample weight
- 3.5 g AI estimate
- Top size
- 24 × 24 mm AI estimate
Pick a colour to start
The sample is one option. Change colour, material, plating, stones or branding to fit your budget.
- MOQ 100 pcs per design per colour; mix sizes, not colours
- Existing mould: made as sampled. Changes that need a new mould are sampled as a new design (from US$100, mould included; the cost is credited to your bulk order)
- Samples ship 15–20 days after approval, with a 3D print and stone-setting preview
- Bulk about 35–45 days from sample approval and deposit
- Bulk payment: 30% deposit, 70% balance before shipment; any sample cost you paid comes off the balance
- 5 common changes need no new mould
Your quote comes with a PDF spec sheet.
About this design
Five open petals, each a smooth polished outline, form a flower about 24 mm across on top of the finger.
The domed centre is plated gold and dotted with small dark recesses, like the seeds of a daisy.
Two petals flow down into a split band, so the flower sits light and airy at about 3.5 g.
All-silver, all-gold or reversed two-tone versions use the same mould.
Updated
Buyer notes
- Trend
- Outline flowers keep big floral shapes light and modern, and daisies are a perennial spring-summer seller.
- Positioning
- An entry-to-core piece: very light, simple casting, with two-tone plating adding perceived value.
- Building a range
- Pair with E00453 engraved flower band and E00452 flower cluster for a floral table in silver and gold.
Customize this design
Pick what to change. Your brief shows whether new tooling is needed, where the cost goes and how to save. We quote from it.
Custom orders we have made
- The request
- The buyer chose three designs from our samples, but her customers do not buy open rings. She also wanted a three-ring stacking set split across sizes.
- What we did
- Because the designs already had moulds, we modified them to closed bands instead of making new moulds. One design she sent had a brushed finish we could not match, so we told her before ordering rather than after.
- Result
- The three-ring set was ordered in four sizes (US 8 to 11), with the closed versions of the three designs planned for the next order.
- The request
- The brand needed 8 mm stainless steel outer shells for its smart ring, with a new surface pattern, gold plating with a green colour fill, and its lettering on the shell.
- What we did
- We made a sample first. After review, the green fill was adjusted brighter to the brand's colour reference, the lettering was laser-marked, and an extra ring size was sampled from the same model when the brand needed it.
- Result
- Bulk planned in black and gold across five sizes, followed by samples of three further shell designs for a larger order.
Specifications
Specs describe the photographed sample; all can change for your order. Tags show the source: factory-confirmed, measured, or AI estimate from photos (checked before we quote).
Ring
- Design code
- N002718
- Ring type
- Flower ring
- Silhouette
- Open flower on a split band
- Band
- Slim split band
- Top
- Open petal outline with a gold centre
Decoration
- Stone
- No stones
- Stone colours
- None
- How stones are fixed
- None
- Pattern
- Daisy flower
- Surface finish
- High polish, two-tone plating
Sample specs
- Material
- 316L stainless steel Factory-confirmed
- Plating
- Confirmed with quote
- Weight
- 3.5 g AI estimate
- Dimensions
- flower 24 mm across, ring height 24 mm AI estimate
Style & use
- Style
- Minimal, Romantic
- Theme
- Floral & botanical
- Categories
- Floral & botanical, Statement, Minimal
- Who it suits
- Women
- Fits these lines
- Floral spring-summer edit, Two-tone collection, Everyday statement line
Structure & craft
Parts, sizes and how the ring is made, for designers and developers. “Est.” sizes are estimated from proportions.
Three parts: five open petal outlines, a domed centre with small recessed dots that is plated gold, and a split band formed by two petals flowing down. The ring is cast in one piece, polished, then the centre is plated gold while the petals are masked.
- 3 parts
- No stones
- One-piece lost-wax casting in stainless steel
- Left–right mirror
- Closed band
Ring anatomy
Open petal outlinesOpenwork×5
Rounded petal loops in polished wire; High polish.
Full details
- Where
- Around the centre
- Shape
- Rounded petal loops in polished wire
- Profile
- Round wire
- Surface
- High polish
- Colour
- Silver tone
Gold dotted centreRelief motif
Small dome with recessed dots; Polished with dark dots. Selectively plated; petals are masked.
Full details
- Where
- Centre of the flower
- Shape
- Small dome with recessed dots
- Surface
- Polished with dark dots
- Colour
- Gold
Split bandBand
Two slim bands formed by the lower petals; High polish.
Full details
- Where
- Under the finger
- Shape
- Two slim bands formed by the lower petals
- Profile
- Half-round
- Surface
- High polish
- Colour
- Silver tone
Key dimensions
- Silhouette
- Open flower on a split band
- Symmetry
- Left–right mirror
- Head W × L × H
- 24 mm × 24 mm × 4.5 mm Est.
- Main stone size
- No stone
- Band width (top / bottom)
- 24 mm / 5 mm Est.
- Ring height
- 24 mm
- Inner diameter
- 17.5 mm Est. Sample estimated at US 7; sizes made to order
- Open ring
- No, closed band
How the parts fit together
- Gold dotted centrearoundOpen petal outlines
The gold dotted centre surrounds the open petal outlinesThe petals surround the centre.
- Open petal outlinesjoined toSplit band
The open petal outlines join the split band
Manufacturing
- Clean masking line between the gold centre and silver petals
- Thin petal outlines must not bend
How this ring is made
8 steps from mould to shipping. Your brief above shows which steps your changes affect.
Shaping the ring
- Wax model
Wax is injected into a rubber mould to make an exact copy of the ring. Each design and size has its own mould.
On this ring: One rubber mould per ring size
- Casting
The wax copy is set in plaster and melted out; molten steel fills the hollow. This is lost-wax casting.
On this ring: Petals, centre and band cast as one piece
- Trimming
The casting stub is cut off and ground smooth.
Surface & colour
- Polishing
The ring is ground and polished to its final shine.
On this ring: Petal outlines polished inside and out
- Plating
A coloured coating (gold, rose gold, black…) is applied to the steel. Colour and coating thickness are set here; thicker coatings last longer.
On this ring: Centre plated gold with the petals masked
Check, pack & ship
- Quality check
Each piece is checked against the approved sample for finish, colour, size, weight and stone security. Rejects are reworked.
On this ring: Check the gold edge is clean and petals are straight
- Packing
We pack free with your packaging: bags, boxes, labels, sorted by size.
- Shipping
Cartons are marked, listed and sent by courier, air or sea, with tracking.
Ways to derive similar designs
| What changes | Tooling | Examples |
|---|---|---|
| Plating split | Same mould | All gold, all silver |
| Centre fill | Same mould | Yellow enamel, pink enamel |
| Centre stone | New mould | Crystal centre |
| Metal colour | Same mould | Gold, steel (silver tone) |
What the photos show
Other ways to make this design
The sample is 316L steel with a gold-plated centre on silver tone petals. All-silver, all-gold and coloured enamel in the centre use the same mould.
5 changes on the existing mould
- 1All gold
Simpler plating, warm look
- 2Yellow or pink enamel centre
A colourful flower on one mould
- 3Crystal in the centre
A sparkle version
- 4304 steel
Lower unit cost
Before you order
What buyers ask most, and what most often goes wrong later.
Why stones come loose, and how to avoid it
Our stones are glued into cast seats. They come loose when a stone doesn’t fit its seat, or from knocks in transit. Confirm stone type (glass / cubic zirconia) and size when ordering, and ask for a piece-by-piece stone check if you need one.
Will the plating fade? How long does it last?
We use vacuum (PVD) plating, which wears better than standard electroplating. Colour life depends on coating thickness, wear and chemicals. Specify thickness to match your after-sales needs. If engraved or etched text must resist solvents, tell us first.
304 or 316L steel?
316L resists corrosion better and suits long skin contact and sensitive skin; 304 costs less and suits fast-fashion lines. For EU/US markets, 316L is recommended.
Size accuracy and size split
Each size has its own mould, made to US sizing. Give quantity per size and any tolerance (e.g. 7:2, 8:4, 9:4, 10:2). Women’s rings usually run US 6–10, men’s 8–13; other sizes need mould work.
The approved sample is the standard
Bulk matches the approved sample in style, colour, stones and weight. Photos can differ in colour, so confirm key colours on the sample. Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview; bulk starts after sample approval and deposit.
Which logo method?
Laser marking and etching need no mould change; raised text does. Etching happens before plating. Send your logo file, position and size. From US$300.
Is the motif sellable in your market?
Some motifs (e.g. snakes, religious symbols) are restricted in some countries or platforms. Tell us where you sell and we’ll flag risks first.
How custom orders work
- 1Send your brief
Use the planner above to list changes and order details.
- 2Review & quote
We confirm feasibility, tooling and unit price. MOQ 100 pcs per design per colour, mixed sizes.
- 3Tooling & sample
Same-mould changes go straight to sampling. New designs start with CAD and tooling (from US$100, mould included; the cost is credited to your bulk order). Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview.
- 4Production
Bulk takes about 35–45 days from sample approval and deposit: wax → casting → sprue grinding → polishing → plating → enamel / stone gluing → packing.
- 5QC & shipping
Inspected against the approved sample, packed and shipped.
Frequently asked questions
What is the MOQ for this ring?
MOQ is 100 pcs per design per colour, mixed sizes. New design samples from US$100, mould included; the cost is credited to your bulk order.
Can I order this design with my logo?
Yes. Laser or etched logo on orders from US$300. Send us your packaging and we pack it free, or we can recommend a supplier.
Can it be all gold or all silver?
Yes. Both use the same mould; all-silver also skips the plating step.
Will the flower bend?
The petals are cast as one piece with the band; we pack each ring so the flower is not pressed.
Does it come in sizes?
Yes. Order by size; sizes can be mixed within the MOQ.
What is the sample made of?
The sample is 316L stainless steel, about 3.5 g. Material, plating and colour can be re-specified for your budget.
Can it be made at a lower cost?
Choose 304 steel, and order fewer colours with more pieces per colour. Laser logos add brand identity without mould costs.