Colour: Steel
Design E00452
Wide Silver Tone Sculpted Flower Cluster Stainless Steel Band Ring for Women
Wide Silver Tone Sculpted Flower Cluster Stainless Steel Band Ring for Women is a wide band ring in 316L stainless steel. MOQ 100 pcs per design per colour; samples from US$100.
A wide women's band ring built entirely from sculpted four-petal flowers that wrap around the finger, with satin-finished petals, polished rims and beaded centres.
Free proposal and quote · reply within 24 hours
- Ring type
- Wide band ring
- Style
- Romantic, Modern
- Sample material
- 316L stainless steel Factory-confirmed
- Sample weight
- 10 g AI estimate
- Top size
- 16 × 18 mm AI estimate
Pick a colour to start
The sample is one option. Change colour, material, plating, stones or branding to fit your budget.
- MOQ 100 pcs per design per colour; mix sizes, not colours
- Existing mould: made as sampled. Changes that need a new mould are sampled as a new design (from US$100, mould included; the cost is credited to your bulk order)
- Samples ship 15–20 days after approval, with a 3D print and stone-setting preview
- Bulk about 35–45 days from sample approval and deposit
- Bulk payment: 30% deposit, 70% balance before shipment; any sample cost you paid comes off the balance
- 5 common changes need no new mould
Your quote comes with a PDF spec sheet.
About this design
Overlapping four-petal flowers form the whole band, about 16 mm wide on top, so the ring looks like a garland around the finger.
Each petal has a satin inner surface and a bright polished edge, and the flower centres are clusters of small raised beads with dark shading between them.
The sample is natural 316L steel with no plating, about 10 g, which keeps the sculpted look light on the hand.
Gold plating and 304 steel are options on the same mould, and the petal finish can be fully polished for a brighter look.
Updated
Buyer notes
- Trend
- Sculpted, oversized florals are a strong spring-summer story, and an all-metal flower band sells across age groups.
- Positioning
- A core-to-hero piece for fashion boutiques and online stores; no stones keeps the unit cost moderate.
- Building a range
- Offer it in steel and gold, and pair with slimmer flower rings such as E00453 and E00454 for a floral stack.
Customize this design
Pick what to change. Your brief shows whether new tooling is needed, where the cost goes and how to save. We quote from it.
Custom orders we have made
- The request
- The buyer chose three designs from our samples, but her customers do not buy open rings. She also wanted a three-ring stacking set split across sizes.
- What we did
- Because the designs already had moulds, we modified them to closed bands instead of making new moulds. One design she sent had a brushed finish we could not match, so we told her before ordering rather than after.
- Result
- The three-ring set was ordered in four sizes (US 8 to 11), with the closed versions of the three designs planned for the next order.
- The request
- The brand needed 8 mm stainless steel outer shells for its smart ring, with a new surface pattern, gold plating with a green colour fill, and its lettering on the shell.
- What we did
- We made a sample first. After review, the green fill was adjusted brighter to the brand's colour reference, the lettering was laser-marked, and an extra ring size was sampled from the same model when the brand needed it.
- Result
- Bulk planned in black and gold across five sizes, followed by samples of three further shell designs for a larger order.
Specifications
Specs describe the photographed sample; all can change for your order. Tags show the source: factory-confirmed, measured, or AI estimate from photos (checked before we quote).
Ring
- Design code
- E00452
- Ring type
- Wide band ring
- Silhouette
- Wide flower garland band
- Band
- Wide band formed by linked flowers
- Top
- Overlapping four-petal flowers
Decoration
- Stone
- No stones
- Stone colours
- None
- How stones are fixed
- None
- Pattern
- Four-petal flowers, Beaded centres
- Surface finish
- Satin petals with polished edges
Sample specs
- Material
- 316L stainless steel Factory-confirmed
- Plating
- Confirmed with quote
- Weight
- 10 g AI estimate
- Dimensions
- band 16 mm wide, ring height 23 mm AI estimate
Style & use
- Style
- Romantic, Modern
- Theme
- Floral & botanical
- Categories
- Wide band, Statement, Floral & botanical, Modern sculptural
- Who it suits
- Women
- Fits these lines
- Floral spring-summer edit, Statement ring line, Botanical collection
Structure & craft
Parts, sizes and how the ring is made, for designers and developers. “Est.” sizes are estimated from proportions.
The band is made of linked four-petal flowers. Each flower has satin petals with polished rims and a beaded centre; neighbouring petals overlap and join to close the ring. The whole ring is cast in one piece, the petal rims polished and the centres shaded.
- 3 parts
- No stones
- One-piece lost-wax casting in stainless steel
- Asymmetric
- Closed band
Ring anatomy
Sculpted four-petal flowersRelief motif×6
Four rounded petals around a centre; Satin inside, polished rims. Flowers of slightly different sizes overlap around the band.
Full details
- Where
- All around the band
- Shape
- Four rounded petals around a centre
- Surface
- Satin inside, polished rims
- Colour
- Steel
Beaded flower centresRelief motif×6
Cluster of small raised beads; Polished beads with dark shading.
Full details
- Where
- Centre of each flower
- Shape
- Cluster of small raised beads
- Surface
- Polished beads with dark shading
- Colour
- Steel with dark shading
Inner bandBand
Continuous inner ring joining the flowers; Polished.
Full details
- Where
- Inside of the ring
- Shape
- Continuous inner ring joining the flowers
- Profile
- Flat
- Surface
- Polished
- Colour
- Steel
Key dimensions
- Silhouette
- Wide flower garland band
- Symmetry
- Asymmetric
- Head W × L × H
- 16 mm × 18 mm Est. × 3 mm Est.
- Main stone size
- No stone
- Band width (top / bottom)
- 16 mm / 12 mm Est.
- Ring height
- 23 mm
- Inner diameter
- 17.5 mm Est. Sample estimated at US 7; sizes made to order
- Open ring
- No, closed band
How the parts fit together
- Beaded flower centresraised onSculpted four-petal flowers
The beaded flower centres stand out in relief on the sculpted four-petal flowers
- Sculpted four-petal flowersfixed toInner band
The sculpted four-petal flowers are fixed to the inner band
- Sculpted four-petal flowersoverlappingSculpted four-petal flowers
The sculpted four-petal flowers partly overlap the sculpted four-petal flowersNeighbouring petals overlap to close the ring.
Manufacturing
- Thin petal edges must cast fully
- Polishing must keep the satin inner petals and only brighten the rims
- Many overlapping petals take time to polish inside the ring
How this ring is made
7 steps from mould to shipping. Your brief above shows which steps your changes affect.
Shaping the ring
- Wax model
Wax is injected into a rubber mould to make an exact copy of the ring. Each design and size has its own mould.
On this ring: One rubber mould per ring size
- Casting
The wax copy is set in plaster and melted out; molten steel fills the hollow. This is lost-wax casting.
On this ring: All flowers and the inner band cast as one piece
- Trimming
The casting stub is cut off and ground smooth.
Surface & colour
- Polishing
The ring is ground and polished to its final shine.
On this ring: Petal rims polished bright; inner petals kept satin
Check, pack & ship
- Quality check
Each piece is checked against the approved sample for finish, colour, size, weight and stone security. Rejects are reworked.
On this ring: Check petal edges are complete and the satin finish is even
- Packing
We pack free with your packaging: bags, boxes, labels, sorted by size.
- Shipping
Cartons are marked, listed and sent by courier, air or sea, with tracking.
Ways to derive similar designs
| What changes | Tooling | Examples |
|---|---|---|
| Petal finish | Same mould | All polished, all satin |
| Flower size or count | New mould | Narrower band with fewer flowers |
| Enamel in the petals | Same mould | Pastel pink, white |
| Metal colour | Same mould | Gold, steel (silver tone) |
What the photos show
Other ways to make this design
The sample is natural-colour 316L steel. Gold plating, 304 steel and an all-polished finish all use the same mould.
5 changes on the existing mould
- 1Gold plating
A warmer, summery look
- 2All-polished petals
More shine under shop lights
- 3Coloured enamel in the petals
A colourful spring story
- 4304 steel
Lower unit cost
Before you order
What buyers ask most, and what most often goes wrong later.
Why stones come loose, and how to avoid it
Our stones are glued into cast seats. They come loose when a stone doesn’t fit its seat, or from knocks in transit. Confirm stone type (glass / cubic zirconia) and size when ordering, and ask for a piece-by-piece stone check if you need one.
Will the plating fade? How long does it last?
We use vacuum (PVD) plating, which wears better than standard electroplating. Colour life depends on coating thickness, wear and chemicals. Specify thickness to match your after-sales needs. If engraved or etched text must resist solvents, tell us first.
304 or 316L steel?
316L resists corrosion better and suits long skin contact and sensitive skin; 304 costs less and suits fast-fashion lines. For EU/US markets, 316L is recommended.
Size accuracy and size split
Each size has its own mould, made to US sizing. Give quantity per size and any tolerance (e.g. 7:2, 8:4, 9:4, 10:2). Women’s rings usually run US 6–10, men’s 8–13; other sizes need mould work.
The approved sample is the standard
Bulk matches the approved sample in style, colour, stones and weight. Photos can differ in colour, so confirm key colours on the sample. Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview; bulk starts after sample approval and deposit.
Which logo method?
Laser marking and etching need no mould change; raised text does. Etching happens before plating. Send your logo file, position and size. From US$300.
Is the motif sellable in your market?
Some motifs (e.g. snakes, religious symbols) are restricted in some countries or platforms. Tell us where you sell and we’ll flag risks first.
How custom orders work
- 1Send your brief
Use the planner above to list changes and order details.
- 2Review & quote
We confirm feasibility, tooling and unit price. MOQ 100 pcs per design per colour, mixed sizes.
- 3Tooling & sample
Same-mould changes go straight to sampling. New designs start with CAD and tooling (from US$100, mould included; the cost is credited to your bulk order). Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview.
- 4Production
Bulk takes about 35–45 days from sample approval and deposit: wax → casting → sprue grinding → polishing → plating → enamel / stone gluing → packing.
- 5QC & shipping
Inspected against the approved sample, packed and shipped.
Frequently asked questions
What is the MOQ for this ring?
MOQ is 100 pcs per design per colour, mixed sizes. New design samples from US$100, mould included; the cost is credited to your bulk order.
Can I order this design with my logo?
Yes. Laser or etched logo on orders from US$300. Send us your packaging and we pack it free, or we can recommend a supplier.
Can it be gold?
Yes. Gold plating uses the same mould; the satin petals and polished rims show well in gold.
Is a wide flower band comfortable?
The inside is a continuous smooth band, rounded and hand-polished, so the flowers sit on the outside only.
Can we add colour?
Yes. The satin petal hollows can be filled with pastel enamel on the same mould.
What is the sample made of?
The sample is 316L stainless steel, about 10 g. Material, plating and colour can be re-specified for your budget.
Can it be made at a lower cost?
Choose 304 steel, and order fewer colours with more pieces per colour. Laser logos add brand identity without mould costs.