Colour: Gold
Design N002711
Gold Leopard Head Black Enamel Spots Stainless Steel Wrap Ring for Women
Gold Leopard Head Black Enamel Spots Stainless Steel Wrap Ring for Women is a wrap ring in 316L stainless steel with 24K PVD gold plating. MOQ 100 pcs per design per colour; samples from US$100.
A women's gold wrap ring shaped as a sleek leopard: the head, dotted with black enamel spots, rests on top of the finger while the smooth body wraps around to a rounded tail.
Free proposal and quote · reply within 24 hours
- Ring type
- Wrap ring
- Style
- Glamorous, Classic
- Sample material
- 316L stainless steel Factory-confirmed
- Sample plating
- 24K PVD gold AI estimate
- Sample weight
- 9 g AI estimate
- Top size
- 9 × 14 mm AI estimate
Pick a colour to start
The sample is one option. Change colour, material, plating, stones or branding to fit your budget.
- MOQ 100 pcs per design per colour; mix sizes, not colours
- Existing mould: made as sampled. Changes that need a new mould are sampled as a new design (from US$100, mould included; the cost is credited to your bulk order)
- Samples ship 15–20 days after approval, with a 3D print and stone-setting preview
- Bulk about 35–45 days from sample approval and deposit
- Bulk payment: 30% deposit, 70% balance before shipment; any sample cost you paid comes off the balance
- 5 common changes need no new mould
Your quote comes with a PDF spec sheet.
About this design
A sculpted leopard head about 9 mm wide sits on top, with black enamel spots and small raised details for the eyes and ears.
The body flows back smoothly into the band and finishes in a rounded tail that faces the head across the opening.
Polished gold against black spots gives a luxurious animal look that buyers recognise instantly.
The sample is 316L steel with 24K PVD gold, about 9 g; spot colour and plating can change on the same mould.
Updated
Buyer notes
- Trend
- Big-cat wrap rings are a lasting luxury-inspired look, and gold with black spots reads as premium at a fashion price.
- Positioning
- A hero piece for fashion boutiques; enamel spots and the detailed head drive the cost.
- Building a range
- Pair with E00481 snake ring for an animal edit, and offer gold and steel colours.
Customize this design
Pick what to change. Your brief shows whether new tooling is needed, where the cost goes and how to save. We quote from it.
Custom orders we have made
- The request
- The buyer chose three designs from our samples, but her customers do not buy open rings. She also wanted a three-ring stacking set split across sizes.
- What we did
- Because the designs already had moulds, we modified them to closed bands instead of making new moulds. One design she sent had a brushed finish we could not match, so we told her before ordering rather than after.
- Result
- The three-ring set was ordered in four sizes (US 8 to 11), with the closed versions of the three designs planned for the next order.
- The request
- The brand needed 8 mm stainless steel outer shells for its smart ring, with a new surface pattern, gold plating with a green colour fill, and its lettering on the shell.
- What we did
- We made a sample first. After review, the green fill was adjusted brighter to the brand's colour reference, the lettering was laser-marked, and an extra ring size was sampled from the same model when the brand needed it.
- Result
- Bulk planned in black and gold across five sizes, followed by samples of three further shell designs for a larger order.
Specifications
Specs describe the photographed sample; all can change for your order. Tags show the source: factory-confirmed, measured, or AI estimate from photos (checked before we quote).
Ring
- Design code
- N002711
- Ring type
- Wrap ring
- Silhouette
- Animal wrap
- Band
- Smooth body tapering to a tail
- Top
- Leopard head with enamel spots
- Adjustable
- Yes
Decoration
- Stone
- No stones
- Stone colours
- None
- How stones are fixed
- None
- Pattern
- Leopard, Spots
- Surface finish
- High polish with black enamel
Sample specs
- Material
- 316L stainless steel Factory-confirmed
- Plating
- 24K PVD gold AI estimate
- Weight
- 9 g AI estimate
- Dimensions
- head 9 mm, ring height 27 mm AI estimate
Structure & craft
Parts, sizes and how the ring is made, for designers and developers. “Est.” sizes are estimated from proportions.
Three parts: a sculpted leopard head with recessed spots filled with black enamel, a smooth body that forms the band, and a rounded tail end facing the head across the opening. The ring is cast in one piece, polished and plated, then the spots are filled with enamel.
- 4 parts
- No stones
- One-piece lost-wax casting in stainless steel, open ends shaped after casting
- Asymmetric
- Open, adjustable
Ring anatomy
Leopard headHead
Sculpted head with ears and eyes; High polish.
Full details
- Where
- Top of the ring
- Shape
- Sculpted head with ears and eyes
- Surface
- High polish
- Colour
- Gold
Black enamel spotsEnamel area×10
Small rounded recesses; Glossy enamel.
Full details
- Where
- Over the head and neck
- Shape
- Small rounded recesses
- Surface
- Glossy enamel
- Colour
- Black
Body bandBand
Smooth body tapering towards the tail; High polish.
Full details
- Where
- Around the finger
- Shape
- Smooth body tapering towards the tail
- Profile
- D-shape
- Surface
- High polish
- Colour
- Gold
Rounded tailOpen end
Rounded tapered end; High polish.
Full details
- Where
- End of the band facing the head
- Shape
- Rounded tapered end
- Profile
- Round
- Surface
- High polish
- Colour
- Gold
Key dimensions
- Silhouette
- Animal wrap
- Symmetry
- Asymmetric
- Head W × L × H
- 9 mm × 14 mm Est. × 7.5 mm Est.
- Main stone size
- No stone
- Band width (top / bottom)
- 10 mm Est. / 5 mm Est.
- Ring height
- 27 mm
- Inner diameter
- 17.5 mm Est. Sample estimated at US 7; sizes made to order
- Open ring
- Yes, adjustable
How the parts fit together
- Black enamel spotsinlaid inLeopard head
The black enamel spots are inlaid flush into the leopard head
- Leopard headjoined toBody band
The leopard head joins the body band
- Rounded tailjoined toBody band
The rounded tail joins the body band
Manufacturing
- Enamel must stay inside each spot without smearing the gold
- Facial details must cast crisply
How this ring is made
9 steps from mould to shipping. Your brief above shows which steps your changes affect.
Shaping the ring
- Wax model
Wax is injected into a rubber mould to make an exact copy of the ring. Each design and size has its own mould.
On this ring: One rubber mould per ring size
- Casting
The wax copy is set in plaster and melted out; molten steel fills the hollow. This is lost-wax casting.
On this ring: Head, body and tail cast as one piece
- Trimming
The casting stub is cut off and ground smooth.
Surface & colour
- Polishing
The ring is ground and polished to its final shine.
On this ring: Polished around the facial details
- Plating
A coloured coating (gold, rose gold, black…) is applied to the steel. Colour and coating thickness are set here; thicker coatings last longer.
On this ring: Gold-tone PVD plating
Details & stones
- Enamel filling
Coloured enamel or resin glaze is filled into the recesses by hand and cured to a glossy finish. Each extra colour adds a step.
On this ring: Black enamel filled into each spot
Check, pack & ship
- Quality check
Each piece is checked against the approved sample for finish, colour, size, weight and stone security. Rejects are reworked.
On this ring: Check the spots are clean and the face is crisp
- Packing
We pack free with your packaging: bags, boxes, labels, sorted by size.
- Shipping
Cartons are marked, listed and sent by courier, air or sea, with tracking.
Ways to derive similar designs
| What changes | Tooling | Examples |
|---|---|---|
| Spot colour | Same mould | Brown, dark green |
| Eye detail | New mould | Crystal eyes |
| Animal head | New mould | Tiger, lion |
| Metal colour | Same mould | Gold, steel (silver tone) |
What the photos show
Other ways to make this design
The sample is 316L steel with 24K PVD gold and black enamel spots. Spot colour, steel colour and crystal eyes are options; reshaping the head needs a new mould.
5 changes on the existing mould
- 1Steel (silver tone) with black spots
A snow-leopard look
- 2Green crystal eyes
A premium detail
- 3Brown or dark green enamel spots
A softer colour story
- 4304 steel and 18K PVD
Lower unit cost
Before you order
What buyers ask most, and what most often goes wrong later.
Why stones come loose, and how to avoid it
Our stones are glued into cast seats. They come loose when a stone doesn’t fit its seat, or from knocks in transit. Confirm stone type (glass / cubic zirconia) and size when ordering, and ask for a piece-by-piece stone check if you need one.
Will the plating fade? How long does it last?
We use vacuum (PVD) plating, which wears better than standard electroplating. Colour life depends on coating thickness, wear and chemicals. Specify thickness to match your after-sales needs. If engraved or etched text must resist solvents, tell us first.
304 or 316L steel?
316L resists corrosion better and suits long skin contact and sensitive skin; 304 costs less and suits fast-fashion lines. For EU/US markets, 316L is recommended.
Size accuracy and size split
Each size has its own mould, made to US sizing. Give quantity per size and any tolerance (e.g. 7:2, 8:4, 9:4, 10:2). Women’s rings usually run US 6–10, men’s 8–13; other sizes need mould work.
The approved sample is the standard
Bulk matches the approved sample in style, colour, stones and weight. Photos can differ in colour, so confirm key colours on the sample. Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview; bulk starts after sample approval and deposit.
Which logo method?
Laser marking and etching need no mould change; raised text does. Etching happens before plating. Send your logo file, position and size. From US$300.
Is the motif sellable in your market?
Some motifs (e.g. snakes, religious symbols) are restricted in some countries or platforms. Tell us where you sell and we’ll flag risks first.
How custom orders work
- 1Send your brief
Use the planner above to list changes and order details.
- 2Review & quote
We confirm feasibility, tooling and unit price. MOQ 100 pcs per design per colour, mixed sizes.
- 3Tooling & sample
Same-mould changes go straight to sampling. New designs start with CAD and tooling (from US$100, mould included; the cost is credited to your bulk order). Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview.
- 4Production
Bulk takes about 35–45 days from sample approval and deposit: wax → casting → sprue grinding → polishing → plating → enamel / stone gluing → packing.
- 5QC & shipping
Inspected against the approved sample, packed and shipped.
Frequently asked questions
What is the MOQ for this ring?
MOQ is 100 pcs per design per colour, mixed sizes. New design samples from US$100, mould included; the cost is credited to your bulk order.
Can I order this design with my logo?
Yes. Laser or etched logo on orders from US$300. Send us your packaging and we pack it free, or we can recommend a supplier.
Can the spots be another colour?
Yes. The spots are filled with enamel after casting, so brown or dark green use the same mould.
Can we add crystal eyes?
Yes, with small eye seats added to the mould; enamel eyes on the existing mould are cheaper.
Is it adjustable?
The head and tail face each other across an opening, so it can be eased slightly; we recommend ordering by size.
What is the sample made of?
The sample is 316L stainless steel with 24K PVD gold plating, about 9 g. Material, plating and colour can be re-specified for your budget.
Can it be made at a lower cost?
Choose 304 steel, keep the enamel to one colour, and order fewer colours with more pieces per colour. Laser logos add brand identity without mould costs.