Colour: Steel
Design E00454
Silver Tone Carved Rose Antique Stainless Steel Open Cuff Ring for Women
Silver Tone Carved Rose Antique Stainless Steel Open Cuff Ring for Women is an open ring in 316L stainless steel. MOQ 100 pcs per design per colour; samples from US$100.
An adjustable open cuff ring whose 10 mm domed front is carved with roses and leafy scrolls on a dark antique ground, tapering to slim polished arms.
Free proposal and quote · reply within 24 hours
- Ring type
- Open ring
- Style
- Vintage, Romantic
- Sample material
- 316L stainless steel Factory-confirmed
- Sample weight
- 6.5 g AI estimate
- Top size
- 10 × 24 mm AI estimate
Pick a colour to start
The sample is one option. Change colour, material, plating, stones or branding to fit your budget.
- MOQ 100 pcs per design per colour; mix sizes, not colours
- Existing mould: made as sampled. Changes that need a new mould are sampled as a new design (from US$100, mould included; the cost is credited to your bulk order)
- Samples ship 15–20 days after approval, with a 3D print and stone-setting preview
- Bulk about 35–45 days from sample approval and deposit
- Bulk payment: 30% deposit, 70% balance before shipment; any sample cost you paid comes off the balance
- 5 common changes need no new mould
Your quote comes with a PDF spec sheet.
About this design
The front is a gently domed panel about 10 mm wide, covered in raised roses and leafy scrolls.
The ground between the carving is filled dark, so the polished roses stand out with an antique, heirloom feel.
The band tapers to slim polished arms with rounded tips and stays open at the back, so one size fits most fingers.
The sample is 316L steel in natural colour, about 6.5 g; gold plating and other fill colours use the same mould.
Updated
Buyer notes
- Trend
- Rose motifs with an antique finish keep selling in vintage and romantic ranges, and the cuff shape needs no size split.
- Positioning
- An entry-to-core piece for online and fashion wholesale: light, one size and easy to stock.
- Building a range
- Pair with E00453 engraved flower band for an antique floral stack, or run the rose cuff in steel and gold.
Customize this design
Pick what to change. Your brief shows whether new tooling is needed, where the cost goes and how to save. We quote from it.
Custom orders we have made
- The request
- The buyer chose three designs from our samples, but her customers do not buy open rings. She also wanted a three-ring stacking set split across sizes.
- What we did
- Because the designs already had moulds, we modified them to closed bands instead of making new moulds. One design she sent had a brushed finish we could not match, so we told her before ordering rather than after.
- Result
- The three-ring set was ordered in four sizes (US 8 to 11), with the closed versions of the three designs planned for the next order.
- The request
- The brand needed 8 mm stainless steel outer shells for its smart ring, with a new surface pattern, gold plating with a green colour fill, and its lettering on the shell.
- What we did
- We made a sample first. After review, the green fill was adjusted brighter to the brand's colour reference, the lettering was laser-marked, and an extra ring size was sampled from the same model when the brand needed it.
- Result
- Bulk planned in black and gold across five sizes, followed by samples of three further shell designs for a larger order.
Specifications
Specs describe the photographed sample; all can change for your order. Tags show the source: factory-confirmed, measured, or AI estimate from photos (checked before we quote).
Ring
- Design code
- E00454
- Ring type
- Open ring
- Silhouette
- Tapered open cuff
- Band
- Domed front tapering to slim arms
- Top
- Carved roses on a dark ground
- Adjustable
- Yes
Decoration
- Stone
- No stones
- Stone colours
- None
- How stones are fixed
- None
- Pattern
- Roses, Leafy scrolls
- Surface finish
- Polished relief with antique dark ground
Sample specs
- Material
- 316L stainless steel Factory-confirmed
- Plating
- Confirmed with quote
- Weight
- 6.5 g AI estimate
- Dimensions
- front 10 mm wide, ring height 23 mm AI estimate
Style & use
- Style
- Vintage, Romantic
- Theme
- Floral & botanical
- Categories
- Open ring, Floral & botanical, Vintage
- Who it suits
- Women
- Fits these lines
- Vintage romance edit, Floral collection, One-size open ring line
Structure & craft
Parts, sizes and how the ring is made, for designers and developers. “Est.” sizes are estimated from proportions.
Three parts: a domed front panel carved with roses and scrolls, dark fill in the ground between the carving, and slim polished arms that taper to rounded tips at the opening. The ring is cast in one piece, polished, then the ground is filled dark and wiped back.
- 3 parts
- No stones
- One-piece lost-wax casting in stainless steel, open ends shaped after casting
- Left–right mirror
- Open, adjustable
Ring anatomy
Carved roses and scrollsRelief motif
Raised roses with leafy scrolls on a domed panel; Polished relief.
Full details
- Where
- Front panel
- Shape
- Raised roses with leafy scrolls on a domed panel
- Surface
- Polished relief
- Colour
- Steel
Antique dark groundEnamel area
Fill in the low areas; Matte dark. Wiped back so only the ground stays dark.
Full details
- Where
- Ground between the carving
- Shape
- Fill in the low areas
- Surface
- Matte dark
- Colour
- Black
Tapered open armsBand×2
Slim arms tapering to rounded tips; High polish.
Full details
- Where
- Sides and back
- Shape
- Slim arms tapering to rounded tips
- Profile
- Half-round
- Surface
- High polish
- Colour
- Steel
Key dimensions
- Silhouette
- Tapered open cuff
- Symmetry
- Left–right mirror
- Head W × L × H
- 10 mm × 24 mm Est. × 3 mm Est.
- Main stone size
- No stone
- Band width (top / bottom)
- 10 mm / 3 mm Est.
- Ring height
- 23 mm
- Inner diameter
- 17.5 mm Est. Sample estimated at US 7; sizes made to order
- Open ring
- Yes, adjustable
How the parts fit together
- Antique dark groundinlaid inCarved roses and scrolls
The antique dark ground is inlaid flush into the carved roses and scrolls
- Carved roses and scrollsjoined toTapered open arms
The carved roses and scrolls joins the tapered open arms
Manufacturing
- Dark fill must be wiped evenly so the roses stay bright
- Slim open arms must not crack when adjusted
How this ring is made
8 steps from mould to shipping. Your brief above shows which steps your changes affect.
Shaping the ring
- Wax model
Wax is injected into a rubber mould to make an exact copy of the ring. Each design and size has its own mould.
On this ring: One open size fits most fingers, so a single mould
- Casting
The wax copy is set in plaster and melted out; molten steel fills the hollow. This is lost-wax casting.
On this ring: Carved front and arms cast as one piece
- Trimming
The casting stub is cut off and ground smooth.
Surface & colour
- Polishing
The ring is ground and polished to its final shine.
On this ring: Roses and arms polished
Details & stones
- Enamel filling
Coloured enamel or resin glaze is filled into the recesses by hand and cured to a glossy finish. Each extra colour adds a step.
On this ring: Dark fill wiped into the ground for the antique look
Check, pack & ship
- Quality check
Each piece is checked against the approved sample for finish, colour, size, weight and stone security. Rejects are reworked.
On this ring: Check the antique ground is even and the tips are smooth
- Packing
We pack free with your packaging: bags, boxes, labels, sorted by size.
- Shipping
Cartons are marked, listed and sent by courier, air or sea, with tracking.
Ways to derive similar designs
| What changes | Tooling | Examples |
|---|---|---|
| Ground colour | Same mould | Black, deep red enamel, none |
| Front motif | New mould | Peonies, leaves |
| Metal colour | Same mould | Gold, steel (silver tone) |
What the photos show
Other ways to make this design
The sample is natural 316L steel with a dark antique ground. Gold plating, 304 steel and other fill colours use the same mould.
5 changes on the existing mould
- 1Gold plating with dark ground
Antique-gold romance look
- 2Deep red or green enamel ground
A rich colour story
- 3304 steel
Lower unit cost
- 4Logo inside the band
Brand identity, no mould cost
Before you order
What buyers ask most, and what most often goes wrong later.
Why stones come loose, and how to avoid it
Our stones are glued into cast seats. They come loose when a stone doesn’t fit its seat, or from knocks in transit. Confirm stone type (glass / cubic zirconia) and size when ordering, and ask for a piece-by-piece stone check if you need one.
Will the plating fade? How long does it last?
We use vacuum (PVD) plating, which wears better than standard electroplating. Colour life depends on coating thickness, wear and chemicals. Specify thickness to match your after-sales needs. If engraved or etched text must resist solvents, tell us first.
304 or 316L steel?
316L resists corrosion better and suits long skin contact and sensitive skin; 304 costs less and suits fast-fashion lines. For EU/US markets, 316L is recommended.
Size accuracy and size split
Each size has its own mould, made to US sizing. Give quantity per size and any tolerance (e.g. 7:2, 8:4, 9:4, 10:2). Women’s rings usually run US 6–10, men’s 8–13; other sizes need mould work.
The approved sample is the standard
Bulk matches the approved sample in style, colour, stones and weight. Photos can differ in colour, so confirm key colours on the sample. Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview; bulk starts after sample approval and deposit.
Which logo method?
Laser marking and etching need no mould change; raised text does. Etching happens before plating. Send your logo file, position and size. From US$300.
Is the motif sellable in your market?
Some motifs (e.g. snakes, religious symbols) are restricted in some countries or platforms. Tell us where you sell and we’ll flag risks first.
How custom orders work
- 1Send your brief
Use the planner above to list changes and order details.
- 2Review & quote
We confirm feasibility, tooling and unit price. MOQ 100 pcs per design per colour, mixed sizes.
- 3Tooling & sample
Same-mould changes go straight to sampling. New designs start with CAD and tooling (from US$100, mould included; the cost is credited to your bulk order). Samples arrive about 15–20 days after approval, with a 3D print and stone-setting preview.
- 4Production
Bulk takes about 35–45 days from sample approval and deposit: wax → casting → sprue grinding → polishing → plating → enamel / stone gluing → packing.
- 5QC & shipping
Inspected against the approved sample, packed and shipped.
Frequently asked questions
What is the MOQ for this ring?
MOQ is 100 pcs per design per colour, mixed sizes. New design samples from US$100, mould included; the cost is credited to your bulk order.
Can I order this design with my logo?
Yes. Laser or etched logo on orders from US$300. Send us your packaging and we pack it free, or we can recommend a supplier.
Is the ring adjustable?
Yes. The arms are open at the back, so one size fits most fingers and no size split is needed.
Will the dark finish wear off?
The dark fill sits in the ground below the raised roses, which protects it in daily wear. The approved sample sets the standard.
Can the ground be a colour other than black?
Yes. Deep red or green enamel fits the same mould and adds a richer look.
What is the sample made of?
The sample is 316L stainless steel, about 6.5 g. Material, plating and colour can be re-specified for your budget.
Can it be made at a lower cost?
Choose 304 steel, keep the enamel to one colour, and order fewer colours with more pieces per colour. Laser logos add brand identity without mould costs.